PreSonus Eris E5 XT
Building upon the success of the original, the PreSonus Eris E5 XT Two-Way Active 5″ Studio Monitor offers the same robust connectivity options with an updated driver combo and a larger ported enclosure. The Hugh Sarvis designed EBM waveguide delivers a wider and more controlled sweet spot, ideal for group listening and collaboration. The E5 XT utilizes 80W Class-AB biamplification to power the 5″ woven composite woofer and 1″ ultralow-mass, silk-dome high-frequency driver, which combine to deliver up to 102 dB of continuous SPL
The Eris E5 provides a balanced XLR, a balanced ¼” TRS, and an unbalanced RCA line-level input. Dial in the acoustic tuning controls for a flattened frequency response and an accurate mixing contour. The acoustic controls on the rear panel include Level, HPF, LF-Trim, HF-Trim, and Acoustic Space. The PreSonus Eris E5 XT ships with a power cord. It is easy to feed audio to your Eris E5 XT studio monitors from an audio interface, mixer, monitor controller, or almost any other line-level source. Eris E5 XT monitors provide balanced XLR, balanced 1/4-inch TRS, and unbalanced RCA line-level inputs. You will have no problem hooking your Eris speakers up to virtually anything.
The Eris XT studio monitors is outfitted with a new EBM (Elliptical Boundary Modeled) wave guide designed by none other than Hugh Sarvis of WorxAudio, the mind behind our award-winning CDL loudspeakers and lauded R-Series monitors. The result? A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot. It is ideal for group listening and collaboration‚ while narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.
Features:
- 5.25-inch woven composite low-frequency transducer and 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 100˚(H) x 60˚(V) EBM waveguide for wide sweet spot
- Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
- 70 watt, Class AB amplification
- 102 dB maximum continuous SPL, with 48 Hz to 20 kHz frequency response
- Acoustic Tuning controls: HF (±6 dB, continuously variable); Midrange (±6 dB, continuously variable), and Acoustic Space (flat, -2, -4 dB), plus highpass filter (Off, 80 Hz, 100 Hz)
- RF interference, output current limiting, over-temperature, transient, subsonic protection and amplifier “soft start” feature (eliminates popping on power-up)
- Internal power supply with IEC connector and power switch with on/off LED
- Balanced XLR and ¼-inch inputs and unbalanced RCA inputs
- Studio One™ Prime and Studio Magic Software Suite
Related Products
The G4 ROKIT 5″ monitor is built with a scientifically designed speaker enclosure and a front-firing port that offers low-end extension, punch, and flexible room positioning. Other features include Class-D 55W total output power, ISO-foam pads that decouple the speaker from the surface, and a built-in brick wall limiter to protect the system and offer wider dynamics. A power cord is included.
KRK ROKIT 5 G3 features
- 1-inch soft-dome tweeter provides clarity and extended response up to 35kHz
- 5-inch glass-aramid composite woofer delivers clear midrange and tight bass
- Bi-amped, class A/B amplifier offering large headroom and low distortion
- Proprietary waveguide technology optimized for superior imaging
- Low-frequency adjustment tailors the monitors to taste and adjusts for room acoustics
- High-frequency adjustment tailors the system to personal taste
- XLR, 1/4-inch and RCA inputs for universal connectivity in any studio environment
Behringer Truth B2030A Active 2-Way Reference Studio
- Equipped with: 6 3/4” Bass speaker and 3/4” tweeter
- Two built-in power amplifiers (70 W bass, 35 W high range frequency)
- Extremely linear frequency range (50 – 21,000 Hz)
- Separately controlled limiter for bass and treble
- Magnetically shielded
- Servo-balanced inputs on XLR and jack sockets
- Dimensions (W x H x D): 214 x 317 x 211 mm
- Weight approx. 10 kg
- The price is for a pair
Out of stock
Behringer HA 400 Headphone Amplifier allows everyone to listen in, and control the volume of his or her own headphones.
Key Features
- 5″ Woven Kevlar Woofer
- 1″ Silk Dome Tweeter
- Class-AB Amplification
- 40W of LF Power, 30W of HF Power
- Waveguide with LED Placement Cues
- Acoustic Space Control
- 56 Hz to 22 kHz Frequency Response
- XLR and 1/4″ TRS Input Connectors
- Multiple Points of Protection
The PreSonus Eris E4.5 BT speakers deliver studio-quality sound with the convenience of Bluetooth® wireless technology.
M-Audio BX8 Carbon Studio Monitors
The BX8 Carbon studio monitors help you track, monitor, and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 8″ woven Kevlar low-frequency driver and 1.25″ natural silk dome tweeter,
Pre sonus eris 5 studio monitor
The PreSonus Eris 5 Studio Monitor is a compact and affordable solution for accurate audio monitoring in home studios, multimedia setups, and small professional studios. With its balanced sound reproduction, flexible connectivity options, and compact design, it provides clear and detailed audio playback for critical listening and mixing applications.
Pre sonus eris 4.5 studio monitor
The PreSonus Eris 4.5 Studio Monitor is a compact and affordable solution for accurate audio monitoring in home studios, multimedia setups, and small professional studios. With its compact size, balanced sound reproduction, and convenient features, it provides clear and detailed audio playback for critical listening and mixing applications.
M-Audio BX8 D2 studio monitor Description
About the item
The Mic Stand is a microphone stand designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.