PreSonus Eris E5 XT
Building upon the success of the original, the PreSonus Eris E5 XT Two-Way Active 5″ Studio Monitor offers the same robust connectivity options with an updated driver combo and a larger ported enclosure. The Hugh Sarvis designed EBM waveguide delivers a wider and more controlled sweet spot, ideal for group listening and collaboration. The E5 XT utilizes 80W Class-AB biamplification to power the 5″ woven composite woofer and 1″ ultralow-mass, silk-dome high-frequency driver, which combine to deliver up to 102 dB of continuous SPL
The Eris E5 provides a balanced XLR, a balanced ¼” TRS, and an unbalanced RCA line-level input. Dial in the acoustic tuning controls for a flattened frequency response and an accurate mixing contour. The acoustic controls on the rear panel include Level, HPF, LF-Trim, HF-Trim, and Acoustic Space. The PreSonus Eris E5 XT ships with a power cord. It is easy to feed audio to your Eris E5 XT studio monitors from an audio interface, mixer, monitor controller, or almost any other line-level source. Eris E5 XT monitors provide balanced XLR, balanced 1/4-inch TRS, and unbalanced RCA line-level inputs. You will have no problem hooking your Eris speakers up to virtually anything.
The Eris XT studio monitors is outfitted with a new EBM (Elliptical Boundary Modeled) wave guide designed by none other than Hugh Sarvis of WorxAudio, the mind behind our award-winning CDL loudspeakers and lauded R-Series monitors. The result? A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot. It is ideal for group listening and collaboration‚ while narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.
Features:
- 5.25-inch woven composite low-frequency transducer and 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 100˚(H) x 60˚(V) EBM waveguide for wide sweet spot
- Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
- 70 watt, Class AB amplification
- 102 dB maximum continuous SPL, with 48 Hz to 20 kHz frequency response
- Acoustic Tuning controls: HF (±6 dB, continuously variable); Midrange (±6 dB, continuously variable), and Acoustic Space (flat, -2, -4 dB), plus highpass filter (Off, 80 Hz, 100 Hz)
- RF interference, output current limiting, over-temperature, transient, subsonic protection and amplifier “soft start” feature (eliminates popping on power-up)
- Internal power supply with IEC connector and power switch with on/off LED
- Balanced XLR and ¼-inch inputs and unbalanced RCA inputs
- Studio One™ Prime and Studio Magic Software Suite
Related Products
Behringer Truth B2030A Active 2-Way Reference Studio
- Equipped with: 6 3/4” Bass speaker and 3/4” tweeter
- Two built-in power amplifiers (70 W bass, 35 W high range frequency)
- Extremely linear frequency range (50 – 21,000 Hz)
- Separately controlled limiter for bass and treble
- Magnetically shielded
- Servo-balanced inputs on XLR and jack sockets
- Dimensions (W x H x D): 214 x 317 x 211 mm
- Weight approx. 10 kg
- The price is for a pair
Out of stock
BEHRINGER NEKKST K5
The Behringer Nekkst K5 Studio Monitor is a compact and affordable audio monitoring solution designed for studio and home recording environments. The monitor is part of Behringer’s Nekkst series, which is known for its attention to detail and collaboration with renowned audio engineer Keith R. Klawitter.
The Nekkst K5 features a 5-inch woofer and a 1-inch silk dome tweeter, which work together to provide a balanced and accurate sound representation across the frequency spectrum. The woofer is designed with a glass fiber cone, which offers a lightweight yet rigid structure, enabling precise and controlled low-frequency reproduction. The silk dome tweeter delivers smooth and detailed high-frequency response.
The PreSonus Eris E4.5 BT speakers deliver studio-quality sound with the convenience of Bluetooth® wireless technology.
High-performance drivers and mounting system
6.5″ cone woofer, 1″ dome tweeter
Large magnets in an Advanced Magnetic Circuit design
Built-in bi-amplification: 60W LF, 35W HF
Dedicated power amps are perfectly matched to the woofer and tweeter
Enclosure is designed to kill unwanted resonances that can influence sound
Room-control and high-trim response controls give you optimum response in any room
KRK ROKIT 5 G3 features
- 1-inch soft-dome tweeter provides clarity and extended response up to 35kHz
- 5-inch glass-aramid composite woofer delivers clear midrange and tight bass
- Bi-amped, class A/B amplifier offering large headroom and low distortion
- Proprietary waveguide technology optimized for superior imaging
- Low-frequency adjustment tailors the monitors to taste and adjusts for room acoustics
- High-frequency adjustment tailors the system to personal taste
- XLR, 1/4-inch and RCA inputs for universal connectivity in any studio environment
The G4 ROKIT 5″ monitor is built with a scientifically designed speaker enclosure and a front-firing port that offers low-end extension, punch, and flexible room positioning. Other features include Class-D 55W total output power, ISO-foam pads that decouple the speaker from the surface, and a built-in brick wall limiter to protect the system and offer wider dynamics. A power cord is included.
The M-Audio® BX studio monitor series is trusted by more musicians and recording professionals than any other. Now, the BX5 D2 monitors extend the bestsellers’ legacy* with an elegant new design inside and out. We leveraged technology from our high-end monitors to extend the frequency response and provide an even more natural listening experience. Custom Class A/B analog amplifiers deliver superior dynamics and tonal accuracy across the frequency spectrum—while the latest-generation woven Kevlar low-frequency drivers and waveguide-loaded silk dome tweeters provide rich, defined sound. With the BX5 D2, you’ll enjoy the utmost accuracy in an engaging listening experience.
Pre sonus eris 5 studio monitor
The PreSonus Eris 5 Studio Monitor is a compact and affordable solution for accurate audio monitoring in home studios, multimedia setups, and small professional studios. With its balanced sound reproduction, flexible connectivity options, and compact design, it provides clear and detailed audio playback for critical listening and mixing applications.
Microphone Pop Filters Shield Specifications
- 【Two-screen Pop Filters】 The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Efficiently reduce the plosive, wind interference, and saliva spraying during your recording or broadcasting, and get a clear and loud sound.
- 【Adjustable Gooseneck】The pop filter has a flexible 360° gooseneck clip stabilizing arm that can support its own weight and is enough to hold the microphone stand and the inner rubber ring is perfectly matched to your microphone.
- 【MULTI-SCENE APPLICATION】:Studio microphone mic wind screen pop filter mask shield is an essential item for recording, speaking or singing; can be used for singing, voiceover, podcasts, vlogging and anywhere else you need quality sound.
- 【Functions】 Banish the dreaded hissing and lisping sounds that come when pronouncing the letter “S” and block those ugly “plosives” that follow “B” and “P”. Swivel mount for easy installation.
- 【PACKAGE & GUARANTEE】:1 X Pop Filter. If you have any problems after receiving this item, please don’t hesitate to contact us, we will try our best to resolve all issues.
PreSonus Eris E8 XT Studio Monitor
The PreSonus Eris E8 XT Monitor is a powerful and accurate studio monitor designed for professional audio production. With its extended frequency response, robust construction, and flexible connectivity options, it delivers precise and detailed sound reproduction for critical listening and mixing applications.
Key Features
- 5″ Woven Kevlar Woofer
- 1″ Silk Dome Tweeter
- Class-AB Amplification
- 40W of LF Power, 30W of HF Power
- Waveguide with LED Placement Cues
- Acoustic Space Control
- 56 Hz to 22 kHz Frequency Response
- XLR and 1/4″ TRS Input Connectors
- Multiple Points of Protection