PreSonus Eris E5 XT
Building upon the success of the original, the PreSonus Eris E5 XT Two-Way Active 5″ Studio Monitor offers the same robust connectivity options with an updated driver combo and a larger ported enclosure. The Hugh Sarvis designed EBM waveguide delivers a wider and more controlled sweet spot, ideal for group listening and collaboration. The E5 XT utilizes 80W Class-AB biamplification to power the 5″ woven composite woofer and 1″ ultralow-mass, silk-dome high-frequency driver, which combine to deliver up to 102 dB of continuous SPL
The Eris E5 provides a balanced XLR, a balanced ¼” TRS, and an unbalanced RCA line-level input. Dial in the acoustic tuning controls for a flattened frequency response and an accurate mixing contour. The acoustic controls on the rear panel include Level, HPF, LF-Trim, HF-Trim, and Acoustic Space. The PreSonus Eris E5 XT ships with a power cord. It is easy to feed audio to your Eris E5 XT studio monitors from an audio interface, mixer, monitor controller, or almost any other line-level source. Eris E5 XT monitors provide balanced XLR, balanced 1/4-inch TRS, and unbalanced RCA line-level inputs. You will have no problem hooking your Eris speakers up to virtually anything.
The Eris XT studio monitors is outfitted with a new EBM (Elliptical Boundary Modeled) wave guide designed by none other than Hugh Sarvis of WorxAudio, the mind behind our award-winning CDL loudspeakers and lauded R-Series monitors. The result? A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot. It is ideal for group listening and collaboration‚ while narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.
Features:
- 5.25-inch woven composite low-frequency transducer and 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 100˚(H) x 60˚(V) EBM waveguide for wide sweet spot
- Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
- 70 watt, Class AB amplification
- 102 dB maximum continuous SPL, with 48 Hz to 20 kHz frequency response
- Acoustic Tuning controls: HF (±6 dB, continuously variable); Midrange (±6 dB, continuously variable), and Acoustic Space (flat, -2, -4 dB), plus highpass filter (Off, 80 Hz, 100 Hz)
- RF interference, output current limiting, over-temperature, transient, subsonic protection and amplifier “soft start” feature (eliminates popping on power-up)
- Internal power supply with IEC connector and power switch with on/off LED
- Balanced XLR and ¼-inch inputs and unbalanced RCA inputs
- Studio One™ Prime and Studio Magic Software Suite
Related Products
PreSonus Eris E5 BT Active Media Reference Monitors with Bluetooth provide a clear, accurate frequency response and a wide variety of inputs.
PreSonus Eris Studio Monitors Features:
- 4.5-inch, woven-composite, low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 50W (25W/side) Class AB amplification
- Bluetooth 5.0 wireless stereo input
- RCA and ¼-inch balanced TRS rear-panel inputs
- Front-panel 1/8-inch stereo Aux In for use with mobile audio devices
- Integrated headphone amplifier with front-panel stereo 1/8-inch jack
- High- and low-frequency controls let you fine-tune the speaker’s response
- Front-panel Volume control
- Rear-firing, round bass-reflex port
The G4 ROKIT 5″ monitor is built with a scientifically designed speaker enclosure and a front-firing port that offers low-end extension, punch, and flexible room positioning. Other features include Class-D 55W total output power, ISO-foam pads that decouple the speaker from the surface, and a built-in brick wall limiter to protect the system and offer wider dynamics. A power cord is included.
About the item
The Mic Stand is a microphone stand designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.
The Behringer HA8000 V2 – Headphone Amplifier offers the highest sonic quality with virtually all types of headphones even at maximum volume.
Microphone Pop Filters Shield Specifications
- 【Two-screen Pop Filters】 The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Efficiently reduce the plosive, wind interference, and saliva spraying during your recording or broadcasting, and get a clear and loud sound.
- 【Adjustable Gooseneck】The pop filter has a flexible 360° gooseneck clip stabilizing arm that can support its own weight and is enough to hold the microphone stand and the inner rubber ring is perfectly matched to your microphone.
- 【MULTI-SCENE APPLICATION】:Studio microphone mic wind screen pop filter mask shield is an essential item for recording, speaking or singing; can be used for singing, voiceover, podcasts, vlogging and anywhere else you need quality sound.
- 【Functions】 Banish the dreaded hissing and lisping sounds that come when pronouncing the letter “S” and block those ugly “plosives” that follow “B” and “P”. Swivel mount for easy installation.
- 【PACKAGE & GUARANTEE】:1 X Pop Filter. If you have any problems after receiving this item, please don’t hesitate to contact us, we will try our best to resolve all issues.
The M-Audio® BX studio monitor series is trusted by more musicians and recording professionals than any other. Now, the BX5 D2 monitors extend the bestsellers’ legacy* with an elegant new design inside and out. We leveraged technology from our high-end monitors to extend the frequency response and provide an even more natural listening experience. Custom Class A/B analog amplifiers deliver superior dynamics and tonal accuracy across the frequency spectrum—while the latest-generation woven Kevlar low-frequency drivers and waveguide-loaded silk dome tweeters provide rich, defined sound. With the BX5 D2, you’ll enjoy the utmost accuracy in an engaging listening experience.
Behringer HA 400 Headphone Amplifier allows everyone to listen in, and control the volume of his or her own headphones.
Pre sonus eris 4.5 studio monitor
The PreSonus Eris 4.5 Studio Monitor is a compact and affordable solution for accurate audio monitoring in home studios, multimedia setups, and small professional studios. With its compact size, balanced sound reproduction, and convenient features, it provides clear and detailed audio playback for critical listening and mixing applications.
- Compact, ultra portable performance keyboard controller with 25 full size, synth action velocity sensitive keys and on board pitch bend and modulation wheels for expressive performances
- 8 velocity sensitive trigger pads for beat production and clip launching, and 8 assignable knobs for manipulating virtual instruments, DAW parameters and plugins on board LCD screen provides instant parameter feedback
- Dedicated octave up and down buttons increase the keyboard to the full melodic range and transport buttons let you control your DAW without reaching for the mouse
- Innovative DirectLink automatically maps controls to popular DAWs including Ableton Live, Pro Tools, Logic, Cubase and more
- Class compliant, plug and play functionality and USB powered specification for simple user friendly setup
- Comprehensive production software package for Mac and PC worth over dollar 100 included; Ableton Live Lite, SONiVOX Twist and AIR Music Tech Xpand