PreSonus Eris E5 XT
Building upon the success of the original, the PreSonus Eris E5 XT Two-Way Active 5″ Studio Monitor offers the same robust connectivity options with an updated driver combo and a larger ported enclosure. The Hugh Sarvis designed EBM waveguide delivers a wider and more controlled sweet spot, ideal for group listening and collaboration. The E5 XT utilizes 80W Class-AB biamplification to power the 5″ woven composite woofer and 1″ ultralow-mass, silk-dome high-frequency driver, which combine to deliver up to 102 dB of continuous SPL
The Eris E5 provides a balanced XLR, a balanced ¼” TRS, and an unbalanced RCA line-level input. Dial in the acoustic tuning controls for a flattened frequency response and an accurate mixing contour. The acoustic controls on the rear panel include Level, HPF, LF-Trim, HF-Trim, and Acoustic Space. The PreSonus Eris E5 XT ships with a power cord. It is easy to feed audio to your Eris E5 XT studio monitors from an audio interface, mixer, monitor controller, or almost any other line-level source. Eris E5 XT monitors provide balanced XLR, balanced 1/4-inch TRS, and unbalanced RCA line-level inputs. You will have no problem hooking your Eris speakers up to virtually anything.
The Eris XT studio monitors is outfitted with a new EBM (Elliptical Boundary Modeled) wave guide designed by none other than Hugh Sarvis of WorxAudio, the mind behind our award-winning CDL loudspeakers and lauded R-Series monitors. The result? A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot. It is ideal for group listening and collaboration‚ while narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.
Features:
- 5.25-inch woven composite low-frequency transducer and 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 100˚(H) x 60˚(V) EBM waveguide for wide sweet spot
- Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
- 70 watt, Class AB amplification
- 102 dB maximum continuous SPL, with 48 Hz to 20 kHz frequency response
- Acoustic Tuning controls: HF (±6 dB, continuously variable); Midrange (±6 dB, continuously variable), and Acoustic Space (flat, -2, -4 dB), plus highpass filter (Off, 80 Hz, 100 Hz)
- RF interference, output current limiting, over-temperature, transient, subsonic protection and amplifier “soft start” feature (eliminates popping on power-up)
- Internal power supply with IEC connector and power switch with on/off LED
- Balanced XLR and ¼-inch inputs and unbalanced RCA inputs
- Studio One™ Prime and Studio Magic Software Suite
Related Products
The HS8 Powered Studio Monitor from Yamaha is a bi-amplified monitor that is designed for accurate sound reproduction.
Behringer HA 400 Headphone Amplifier allows everyone to listen in, and control the volume of his or her own headphones.
M-Audio BX5 specifications
- Type: 2-way near-field studio reference monitors
- LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voicecoil and damped rubber surround. Magnetically shielded
- HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome
- Frequency Response: 56 Hz – 22 kHz
- Crossover Frequency: 2.8 kHz
- LF Amplifier Power: 40 W
- HF Amplifier Power: 30 W
- Signal-to-Noise Ratio: 100 dB typical A-weighted
BEHRINGER NEKKST K5
The Behringer Nekkst K5 Studio Monitor is a compact and affordable audio monitoring solution designed for studio and home recording environments. The monitor is part of Behringer’s Nekkst series, which is known for its attention to detail and collaboration with renowned audio engineer Keith R. Klawitter.
The Nekkst K5 features a 5-inch woofer and a 1-inch silk dome tweeter, which work together to provide a balanced and accurate sound representation across the frequency spectrum. The woofer is designed with a glass fiber cone, which offers a lightweight yet rigid structure, enabling precise and controlled low-frequency reproduction. The silk dome tweeter delivers smooth and detailed high-frequency response.
BEHRINGER MEDIA 40USB Features:
- 2-way digital monitor speakers ideally suited for computer studios, audio and multimedia workstations
- True bi-amping mode with 4 amplifiers for ultimate sound resolution
- 40 Watt of digital power amplification
- Powerful woofers and high-resolution tweeters provide an ultra-linear frequency response
- USB input to directly connect digital audio sources
- Two stereo analogue inputs featuring TRS and RCA connectors can be used simultaneously or mixed with a digital stereo source
PreSonus Eris E8 Active Media Reference Studio Monitors
PreSonus Eris E8 XT Studio Monitor
The PreSonus Eris E8 XT Monitor is a powerful and accurate studio monitor designed for professional audio production. With its extended frequency response, robust construction, and flexible connectivity options, it delivers precise and detailed sound reproduction for critical listening and mixing applications.
M-Audio BX6 Carbon Compact studio monitors
The M-Audio BX-6 Carbon is an active studio monitor featuring a 6” woven Kevlar woofer, 1.25” silk-dome tweeter, a bi-amplified 130 watt class A/B design and a unique Acoustic Space Control feature that lets you calibrate the monitor to your mixing environment.
The PreSonus Eris E4.5 BT speakers deliver studio-quality sound with the convenience of Bluetooth® wireless technology.
- Low-frequency: 8″ Aramid Glass Composite woofer
- High-frequency: 1″ soft dome tweeter
- Amplifier: active, class A-B, bi-amplified
- Power output: 100 W
- Input connectors: Balanced XLR, Balanced 1/4″ TRS – 10 kOhm, Unbalanced RCA – 7 kOhm
- LF Level Adjust: -2dB, -1dB, 0, +2dB
- HF Level Adjust: -2dB, -1dB, 0, +2dB
- System volume: -30dB – +6dB
- Frequency response: 35Hz – 35kHz
- Max Peak SPL: 109 dB
- Auto-Standby: 30min
- Magnetic shielding: yes
- Port Configuration: Front firing slot port
- Enclosure construction: MDF
- Dimensions (D x W x H): 12.4″ (315mm) x 10.8″ (275mm) x 15.6″ (396mm)
- Weight: 24.6 Lbs. (11.2 kg)
The G4 ROKIT 5″ monitor is built with a scientifically designed speaker enclosure and a front-firing port that offers low-end extension, punch, and flexible room positioning. Other features include Class-D 55W total output power, ISO-foam pads that decouple the speaker from the surface, and a built-in brick wall limiter to protect the system and offer wider dynamics. A power cord is included.