Behringer HA8000 V2
The Behringer HA8000 V2 – Headphone Amplifier is the successor of the HA8000 POWERPLAY PRO-8 Headphones Distribution Amplifier.
The HA8000 V2 offers 8 high-power amplifiers that can drive loads down to 8 Ohms. Each amplifier section features its own 8-digit LED Output Level meter, Main In 1/Main In 2 select switch, a stereo or dual mono select switch, and a ¼” Direct Input for integrating an additional sound source. The front panel gives you one ¼ ” Phones Out jack per channel. The Main Section features a dedicated 5-segment LED Input meter, plus Main In 1 and Main In 2 Level dials.
It features eight totally independent stereo high-power amplifier sections in one rack space, 2 separate main inputs, 2 headphone outputs per channel and even a dedicated direct input for each channel. It offers the highest sonic quality with virtually all types of headphones even at maximum volume.
8-Channel Upgraded Headphone Power Amp and Mix Distro!
Features:
- 8-Channel High-Power Headphones Mixing and Distribution Amplifier
- Professional, multi-purpose headphones amplifier system for stage and studio applications
- Highest sonic quality with virtually all types of headphones even at maximum volume
- 8 totally independent stereo high-power amplifier sections in one rack space
- 2 stereo Main inputs for two independent mixes, accessible from all 8 output channels
- 8 independent Direct inputs provide up to 8 individual stereo mixes
- Output level control and accurate 8-digit LED output meter per channel
- Mono/stereo switch per channel for more flexibility
- 1 front and 1 rear TRS phones connector per channel
- Direct input connector on each channel for easy connection of any sound source
- Parallel Main outputs allow cascading of several headphones amplifiers
- “Planet Earth” switching power supply for maximum flexibility (100
- – 240 V~), noise-free audio, superior transient response plus low power consumption for energy savings
Only logged in customers who have purchased this product may leave a review.
Related Products
High-performance drivers and mounting system
6.5″ cone woofer, 1″ dome tweeter
Large magnets in an Advanced Magnetic Circuit design
Built-in bi-amplification: 60W LF, 35W HF
Dedicated power amps are perfectly matched to the woofer and tweeter
Enclosure is designed to kill unwanted resonances that can influence sound
Room-control and high-trim response controls give you optimum response in any room
The G4 ROKIT 5″ monitor is built with a scientifically designed speaker enclosure and a front-firing port that offers low-end extension, punch, and flexible room positioning. Other features include Class-D 55W total output power, ISO-foam pads that decouple the speaker from the surface, and a built-in brick wall limiter to protect the system and offer wider dynamics. A power cord is included.
PreSonus Eris Studio Monitors Features:
- 4.5-inch, woven-composite, low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 50W (25W/side) Class AB amplification
- Bluetooth 5.0 wireless stereo input
- RCA and ¼-inch balanced TRS rear-panel inputs
- Front-panel 1/8-inch stereo Aux In for use with mobile audio devices
- Integrated headphone amplifier with front-panel stereo 1/8-inch jack
- High- and low-frequency controls let you fine-tune the speaker’s response
- Front-panel Volume control
- Rear-firing, round bass-reflex port
Key Features
- 5″ Woven Kevlar Woofer
- 1″ Silk Dome Tweeter
- Class-AB Amplification
- 40W of LF Power, 30W of HF Power
- Waveguide with LED Placement Cues
- Acoustic Space Control
- 56 Hz to 22 kHz Frequency Response
- XLR and 1/4″ TRS Input Connectors
- Multiple Points of Protection
Yamaha Hs5 bi-amplified nearfield studio monitor Features
- MP Matched Pair Special Edition – to celebrate 15 years of HS monitors
- Perfectly matched for best sound quality
- Special production process using only selected parts
- Active 2-way bass-reflex near-field monitors
- 5 inch cone woofer and 1 inch dome tweeter
- Bi-Amp (45 watts LF, 25 watts HF)
- Special power amps are perfectly matched to the woofer and tweeter
- ROOM-CONTROL and HIGH-TRIM tone control
- XLR and jack inputs for balanced and unbalanced signals
BEHRINGER NEKKST K5
The Behringer Nekkst K5 Studio Monitor is a compact and affordable audio monitoring solution designed for studio and home recording environments. The monitor is part of Behringer’s Nekkst series, which is known for its attention to detail and collaboration with renowned audio engineer Keith R. Klawitter.
The Nekkst K5 features a 5-inch woofer and a 1-inch silk dome tweeter, which work together to provide a balanced and accurate sound representation across the frequency spectrum. The woofer is designed with a glass fiber cone, which offers a lightweight yet rigid structure, enabling precise and controlled low-frequency reproduction. The silk dome tweeter delivers smooth and detailed high-frequency response.
The HS8 Powered Studio Monitor from Yamaha is a bi-amplified monitor that is designed for accurate sound reproduction.
Pre sonus eris 4.5 studio monitor
The PreSonus Eris 4.5 Studio Monitor is a compact and affordable solution for accurate audio monitoring in home studios, multimedia setups, and small professional studios. With its compact size, balanced sound reproduction, and convenient features, it provides clear and detailed audio playback for critical listening and mixing applications.
Suitable for both home recording studios and professional mix engineering, the Eris XT studio monitors combine sterling audio quality with the flexible tuning and connectivity you’ve come to expect from PreSonus.
M-Audio BX8 D2Â studio monitor Description
PreSonus Eris E5 BT Active Media Reference Monitors with Bluetooth provide a clear, accurate frequency response and a wide variety of inputs.
The PreSonus Eris E4.5 BT speakers deliver studio-quality sound with the convenience of Bluetooth® wireless technology.
Reviews
There are no reviews yet.