Behringer HA8000 V2
The Behringer HA8000 V2 – Headphone Amplifier offers the highest sonic quality with virtually all types of headphones even at maximum volume.
KSh 35,000.00
Behringer HA8000 V2
The Behringer HA8000 V2 – Headphone Amplifier is the successor of the HA8000 POWERPLAY PRO-8 Headphones Distribution Amplifier.
The HA8000 V2 offers 8 high-power amplifiers that can drive loads down to 8 Ohms. Each amplifier section features its own 8-digit LED Output Level meter, Main In 1/Main In 2 select switch, a stereo or dual mono select switch, and a ¼” Direct Input for integrating an additional sound source. The front panel gives you one ¼ ” Phones Out jack per channel. The Main Section features a dedicated 5-segment LED Input meter, plus Main In 1 and Main In 2 Level dials.
It features eight totally independent stereo high-power amplifier sections in one rack space, 2 separate main inputs, 2 headphone outputs per channel and even a dedicated direct input for each channel. It offers the highest sonic quality with virtually all types of headphones even at maximum volume.
8-Channel Upgraded Headphone Power Amp and Mix Distro!
Features:
- 8-Channel High-Power Headphones Mixing and Distribution Amplifier
- Professional, multi-purpose headphones amplifier system for stage and studio applications
- Highest sonic quality with virtually all types of headphones even at maximum volume
- 8 totally independent stereo high-power amplifier sections in one rack space
- 2 stereo Main inputs for two independent mixes, accessible from all 8 output channels
- 8 independent Direct inputs provide up to 8 individual stereo mixes
- Output level control and accurate 8-digit LED output meter per channel
- Mono/stereo switch per channel for more flexibility
- 1 front and 1 rear TRS phones connector per channel
- Direct input connector on each channel for easy connection of any sound source
- Parallel Main outputs allow cascading of several headphones amplifiers
- “Planet Earth” switching power supply for maximum flexibility (100
- – 240 V~), noise-free audio, superior transient response plus low power consumption for energy savings
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Only logged in customers who have purchased this product may leave a review.
Related Products
PreSonus Eris Studio Monitors Features:
- 4.5-inch, woven-composite, low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 50W (25W/side) Class AB amplification
- Bluetooth 5.0 wireless stereo input
- RCA and ¼-inch balanced TRS rear-panel inputs
- Front-panel 1/8-inch stereo Aux In for use with mobile audio devices
- Integrated headphone amplifier with front-panel stereo 1/8-inch jack
- High- and low-frequency controls let you fine-tune the speaker’s response
- Front-panel Volume control
- Rear-firing, round bass-reflex port
KRK Rokit M6 Studio Monitor
When it comes to professional audio monitoring and sound engineering, having the right tools is crucial. One such tool that has gained significant popularity among audio enthusiasts and professionals is the KRK Rokit M6 Studio Monitor. With its exceptional audio quality, balanced sound, and advanced features, the KRK Rokit M6 offers an unparalleled listening experience. In Kenya, AudioCom is the go-to destination for audio equipment, including the KRK Rokit M6 Studio Monitor. In this article, we will delve into the features, benefits, and overall performance of the KRK Rokit M6 Studio Monitor, while highlighting AudioCom Kenya’s role in making this exceptional speaker system available to consumers.
Key Features
- 5″ Woven Kevlar Woofer
- 1″ Silk Dome Tweeter
- Class-AB Amplification
- 40W of LF Power, 30W of HF Power
- Waveguide with LED Placement Cues
- Acoustic Space Control
- 56 Hz to 22 kHz Frequency Response
- XLR and 1/4″ TRS Input Connectors
- Multiple Points of Protection
Pre sonus eris 4.5 studio monitor
The PreSonus Eris 4.5 Studio Monitor is a compact and affordable solution for accurate audio monitoring in home studios, multimedia setups, and small professional studios. With its compact size, balanced sound reproduction, and convenient features, it provides clear and detailed audio playback for critical listening and mixing applications.
The HS8 Powered Studio Monitor from Yamaha is a bi-amplified monitor that is designed for accurate sound reproduction.
BEHRINGER NEKKST K5
The Behringer Nekkst K5 Studio Monitor is a compact and affordable audio monitoring solution designed for studio and home recording environments. The monitor is part of Behringer’s Nekkst series, which is known for its attention to detail and collaboration with renowned audio engineer Keith R. Klawitter.
The Nekkst K5 features a 5-inch woofer and a 1-inch silk dome tweeter, which work together to provide a balanced and accurate sound representation across the frequency spectrum. The woofer is designed with a glass fiber cone, which offers a lightweight yet rigid structure, enabling precise and controlled low-frequency reproduction. The silk dome tweeter delivers smooth and detailed high-frequency response.
KRK ROKIT 5 G3 features
- 1-inch soft-dome tweeter provides clarity and extended response up to 35kHz
- 5-inch glass-aramid composite woofer delivers clear midrange and tight bass
- Bi-amped, class A/B amplifier offering large headroom and low distortion
- Proprietary waveguide technology optimized for superior imaging
- Low-frequency adjustment tailors the monitors to taste and adjusts for room acoustics
- High-frequency adjustment tailors the system to personal taste
- XLR, 1/4-inch and RCA inputs for universal connectivity in any studio environment
Microphone Pop Filters Shield Specifications
- 【Two-screen Pop Filters】 The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Efficiently reduce the plosive, wind interference, and saliva spraying during your recording or broadcasting, and get a clear and loud sound.
- 【Adjustable Gooseneck】The pop filter has a flexible 360° gooseneck clip stabilizing arm that can support its own weight and is enough to hold the microphone stand and the inner rubber ring is perfectly matched to your microphone.
- 【MULTI-SCENE APPLICATION】:Studio microphone mic wind screen pop filter mask shield is an essential item for recording, speaking or singing; can be used for singing, voiceover, podcasts, vlogging and anywhere else you need quality sound.
- 【Functions】 Banish the dreaded hissing and lisping sounds that come when pronouncing the letter “S” and block those ugly “plosives” that follow “B” and “P”. Swivel mount for easy installation.
- 【PACKAGE & GUARANTEE】:1 X Pop Filter. If you have any problems after receiving this item, please don’t hesitate to contact us, we will try our best to resolve all issues.
Nearfield Studio Monitor Features:
- Versatile nearfield studio monitor that’s great for any style of music
- 8″ Kevlar/aramid composite woofer delivers clear mids and tight bass response
- Soft-dome tweeter with proprietary waveguide provides smooth and lucid highs up to 30kHz
- Active 2-way electronics provide high-headroom/low-noise amplification
- High- and low-frequency controls let you contour your sound to your environment
- Front-slotted bass port and resonant-free cabinet increase sonic clarity
- Radiused edges and contoured front baffle provides clear sound and accurate stereo imaging
- System optimized limiter prevents unexpected peaks from damaging speakers
PreSonus Eris Studio Monitors
- 3.5″ woven composite woofers deliver solid low-end sound with minimal bass distortion
- 50-watt Class AB amplification (25 Watts per speaker) provides plenty of volume and headroom for nearfield monitoring
- RCA and balanced 1/4″ inputs provide all the connections you may need
- Aux input for connecting your smartphone or media player
- Acoustic tuning controls let you contour your sound to best meet your mixing environment
Behringer HA 400 Headphone Amplifier allows everyone to listen in, and control the volume of his or her own headphones.
About the item
The Mic Stand is a microphone stand designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.
Reviews
There are no reviews yet.