Behringer HA8000 V2
The Behringer HA8000 V2 – Headphone Amplifier offers the highest sonic quality with virtually all types of headphones even at maximum volume.
KSh 35,000.00
Behringer HA8000 V2
The Behringer HA8000 V2 – Headphone Amplifier is the successor of the HA8000 POWERPLAY PRO-8 Headphones Distribution Amplifier.
The HA8000 V2 offers 8 high-power amplifiers that can drive loads down to 8 Ohms. Each amplifier section features its own 8-digit LED Output Level meter, Main In 1/Main In 2 select switch, a stereo or dual mono select switch, and a ¼” Direct Input for integrating an additional sound source. The front panel gives you one ¼ ” Phones Out jack per channel. The Main Section features a dedicated 5-segment LED Input meter, plus Main In 1 and Main In 2 Level dials.
It features eight totally independent stereo high-power amplifier sections in one rack space, 2 separate main inputs, 2 headphone outputs per channel and even a dedicated direct input for each channel. It offers the highest sonic quality with virtually all types of headphones even at maximum volume.
8-Channel Upgraded Headphone Power Amp and Mix Distro!
Features:
- 8-Channel High-Power Headphones Mixing and Distribution Amplifier
- Professional, multi-purpose headphones amplifier system for stage and studio applications
- Highest sonic quality with virtually all types of headphones even at maximum volume
- 8 totally independent stereo high-power amplifier sections in one rack space
- 2 stereo Main inputs for two independent mixes, accessible from all 8 output channels
- 8 independent Direct inputs provide up to 8 individual stereo mixes
- Output level control and accurate 8-digit LED output meter per channel
- Mono/stereo switch per channel for more flexibility
- 1 front and 1 rear TRS phones connector per channel
- Direct input connector on each channel for easy connection of any sound source
- Parallel Main outputs allow cascading of several headphones amplifiers
- “Planet Earth” switching power supply for maximum flexibility (100
- – 240 V~), noise-free audio, superior transient response plus low power consumption for energy savings
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Only logged in customers who have purchased this product may leave a review.
Related Products
Behringer Truth B2030A Active 2-Way Reference Studio
- Equipped with: 6 3/4” Bass speaker and 3/4” tweeter
- Two built-in power amplifiers (70 W bass, 35 W high range frequency)
- Extremely linear frequency range (50 – 21,000 Hz)
- Separately controlled limiter for bass and treble
- Magnetically shielded
- Servo-balanced inputs on XLR and jack sockets
- Dimensions (W x H x D): 214 x 317 x 211 mm
- Weight approx. 10 kg
- The price is for a pair
Out of stock
Key Features
- 5″ Woven Kevlar Woofer
- 1″ Silk Dome Tweeter
- Class-AB Amplification
- 40W of LF Power, 30W of HF Power
- Waveguide with LED Placement Cues
- Acoustic Space Control
- 56 Hz to 22 kHz Frequency Response
- XLR and 1/4″ TRS Input Connectors
- Multiple Points of Protection
Nearfield Studio Monitor Features:
- Versatile nearfield studio monitor that’s great for any style of music
- 8″ Kevlar/aramid composite woofer delivers clear mids and tight bass response
- Soft-dome tweeter with proprietary waveguide provides smooth and lucid highs up to 30kHz
- Active 2-way electronics provide high-headroom/low-noise amplification
- High- and low-frequency controls let you contour your sound to your environment
- Front-slotted bass port and resonant-free cabinet increase sonic clarity
- Radiused edges and contoured front baffle provides clear sound and accurate stereo imaging
- System optimized limiter prevents unexpected peaks from damaging speakers
KRK Rokit M6 Studio Monitor
When it comes to professional audio monitoring and sound engineering, having the right tools is crucial. One such tool that has gained significant popularity among audio enthusiasts and professionals is the KRK Rokit M6 Studio Monitor. With its exceptional audio quality, balanced sound, and advanced features, the KRK Rokit M6 offers an unparalleled listening experience. In Kenya, AudioCom is the go-to destination for audio equipment, including the KRK Rokit M6 Studio Monitor. In this article, we will delve into the features, benefits, and overall performance of the KRK Rokit M6 Studio Monitor, while highlighting AudioCom Kenya’s role in making this exceptional speaker system available to consumers.
The PreSonus Eris E4.5 BT speakers deliver studio-quality sound with the convenience of Bluetooth® wireless technology.
KRK ROKIT M5 STUDIO MONITOR
The KRK Rokit M5 Studio Monitor is a compact and versatile audio monitoring solution designed for professional and home studio setups. These monitors are part of the renowned Rokit series by KRK, known for their accurate sound reproduction and reliable performance.
The G4 ROKIT 5″ monitor is built with a scientifically designed speaker enclosure and a front-firing port that offers low-end extension, punch, and flexible room positioning. Other features include Class-D 55W total output power, ISO-foam pads that decouple the speaker from the surface, and a built-in brick wall limiter to protect the system and offer wider dynamics. A power cord is included.
Behringer Studio 50USB Digital Monitor Speakers with USB Input
Product Features
- Ultra-linear 2-way digital monitor speakers ideally suited for computer studios, audio and multimedia workstations
- True bi-amping mode with 4 amplifiers for ultimate high-resolution sound
- 150 Watts of digital power amplification
- Ultra-high resolution 1″ silk dome tweeter for superior audio reproduction
- Long-throw 5″ woofers with deformation-resistant cone for ultimate bass response
- Advanced waveguide technology provides ultimate sound dispersion and an extremely large “sweet spot”
- Adjustable volume control and tweeter sensitivity to adapt to a wide range of acoustic conditions
- USB input for direct connection of digital stereo audio sources
- Two analogue inputs featuring XLR and TRS connectors can be used simultaneously with a digital stereo source
- 3-Year Warranty Program*
- Designed and engineered in Germany
High-performance drivers and mounting system
6.5″ cone woofer, 1″ dome tweeter
Large magnets in an Advanced Magnetic Circuit design
Built-in bi-amplification: 60W LF, 35W HF
Dedicated power amps are perfectly matched to the woofer and tweeter
Enclosure is designed to kill unwanted resonances that can influence sound
Room-control and high-trim response controls give you optimum response in any room
- Compact, ultra portable performance keyboard controller with 25 full size, synth action velocity sensitive keys and on board pitch bend and modulation wheels for expressive performances
- 8 velocity sensitive trigger pads for beat production and clip launching, and 8 assignable knobs for manipulating virtual instruments, DAW parameters and plugins on board LCD screen provides instant parameter feedback
- Dedicated octave up and down buttons increase the keyboard to the full melodic range and transport buttons let you control your DAW without reaching for the mouse
- Innovative DirectLink automatically maps controls to popular DAWs including Ableton Live, Pro Tools, Logic, Cubase and more
- Class compliant, plug and play functionality and USB powered specification for simple user friendly setup
- Comprehensive production software package for Mac and PC worth over dollar 100 included; Ableton Live Lite, SONiVOX Twist and AIR Music Tech Xpand
About the item
The Mic Stand is a microphone stand designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.
Microphone Pop Filters Shield Specifications
- 【Two-screen Pop Filters】 The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Efficiently reduce the plosive, wind interference, and saliva spraying during your recording or broadcasting, and get a clear and loud sound.
- 【Adjustable Gooseneck】The pop filter has a flexible 360° gooseneck clip stabilizing arm that can support its own weight and is enough to hold the microphone stand and the inner rubber ring is perfectly matched to your microphone.
- 【MULTI-SCENE APPLICATION】:Studio microphone mic wind screen pop filter mask shield is an essential item for recording, speaking or singing; can be used for singing, voiceover, podcasts, vlogging and anywhere else you need quality sound.
- 【Functions】 Banish the dreaded hissing and lisping sounds that come when pronouncing the letter “S” and block those ugly “plosives” that follow “B” and “P”. Swivel mount for easy installation.
- 【PACKAGE & GUARANTEE】:1 X Pop Filter. If you have any problems after receiving this item, please don’t hesitate to contact us, we will try our best to resolve all issues.
Reviews
There are no reviews yet.