Table Microphone Stand Best
About the item
The Mic Stand is a microphone stand designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.
KSh 2,000.00
Table Microphone Stand
The microphone stand is designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.
Specifications
| Height | 11.22 to 15.75″ / 284.99 to 400.05Â mm |
| Base Type | Square |
| Base Dimensions | 7.87 x 7.87″ / 19.99 x 19.99Â cm |
| Adjustment Type | Twist Clutch |
Boom
| Length | 12.205″ / 31.00Â cm |
| Mounting Thread | 5/8″-27 Male |
| Material | Steel |
| Weight | 1.476Â lb / 0.67Â kg |
| Package Weight | 4.1 lb |
| Box Dimensions (LxWxH) | 14.25 x 8.85 x 2.1″ |
Related Products
M-Audio BX5 specifications
- Type: 2-way near-field studio reference monitors
- LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voicecoil and damped rubber surround. Magnetically shielded
- HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome
- Frequency Response: 56 Hz – 22 kHz
- Crossover Frequency: 2.8 kHz
- LF Amplifier Power: 40 W
- HF Amplifier Power: 30 W
- Signal-to-Noise Ratio: 100 dB typical A-weighted
- Low-frequency: 8″ Aramid Glass Composite woofer
- High-frequency: 1″ soft dome tweeter
- Amplifier: active, class A-B, bi-amplified
- Power output: 100 W
- Input connectors: Balanced XLR, Balanced 1/4″ TRS – 10 kOhm, Unbalanced RCA – 7 kOhm
- LF Level Adjust: -2dB, -1dB, 0, +2dB
- HF Level Adjust: -2dB, -1dB, 0, +2dB
- System volume: -30dB – +6dB
- Frequency response: 35Hz – 35kHz
- Max Peak SPL: 109 dB
- Auto-Standby: 30min
- Magnetic shielding: yes
- Port Configuration: Front firing slot port
- Enclosure construction: MDF
- Dimensions (D x W x H): 12.4″ (315mm) x 10.8″ (275mm) x 15.6″ (396mm)
- Weight: 24.6 Lbs. (11.2 kg)
PreSonus Eris E8 Active Media Reference Studio Monitors
PreSonus Eris Studio Monitors Features:
- 4.5-inch, woven-composite, low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 50W (25W/side) Class AB amplification
- Bluetooth 5.0 wireless stereo input
- RCA and ¼-inch balanced TRS rear-panel inputs
- Front-panel 1/8-inch stereo Aux In for use with mobile audio devices
- Integrated headphone amplifier with front-panel stereo 1/8-inch jack
- High- and low-frequency controls let you fine-tune the speaker’s response
- Front-panel Volume control
- Rear-firing, round bass-reflex port
The PreSonus Eris E4.5 BT speakers deliver studio-quality sound with the convenience of Bluetooth® wireless technology.
Key Features
- 5″ Woven Kevlar Woofer
- 1″ Silk Dome Tweeter
- Class-AB Amplification
- 40W of LF Power, 30W of HF Power
- Waveguide with LED Placement Cues
- Acoustic Space Control
- 56 Hz to 22 kHz Frequency Response
- XLR and 1/4″ TRS Input Connectors
- Multiple Points of Protection
The HS8 Powered Studio Monitor from Yamaha is a bi-amplified monitor that is designed for accurate sound reproduction.
Yamaha Hs5 bi-amplified nearfield studio monitor Features
- MP Matched Pair Special Edition – to celebrate 15 years of HS monitors
- Perfectly matched for best sound quality
- Special production process using only selected parts
- Active 2-way bass-reflex near-field monitors
- 5 inch cone woofer and 1 inch dome tweeter
- Bi-Amp (45 watts LF, 25 watts HF)
- Special power amps are perfectly matched to the woofer and tweeter
- ROOM-CONTROL and HIGH-TRIM tone control
- XLR and jack inputs for balanced and unbalanced signals
The M-Audio® BX studio monitor series is trusted by more musicians and recording professionals than any other. Now, the BX5 D2 monitors extend the bestsellers’ legacy* with an elegant new design inside and out. We leveraged technology from our high-end monitors to extend the frequency response and provide an even more natural listening experience. Custom Class A/B analog amplifiers deliver superior dynamics and tonal accuracy across the frequency spectrum—while the latest-generation woven Kevlar low-frequency drivers and waveguide-loaded silk dome tweeters provide rich, defined sound. With the BX5 D2, you’ll enjoy the utmost accuracy in an engaging listening experience.
KRK ROKIT M5 STUDIO MONITOR
The KRK Rokit M5 Studio Monitor is a compact and versatile audio monitoring solution designed for professional and home studio setups. These monitors are part of the renowned Rokit series by KRK, known for their accurate sound reproduction and reliable performance.
PreSonus Eris E8 XT Studio Monitor
The PreSonus Eris E8 XT Monitor is a powerful and accurate studio monitor designed for professional audio production. With its extended frequency response, robust construction, and flexible connectivity options, it delivers precise and detailed sound reproduction for critical listening and mixing applications.
BEHRINGER MEDIA 40USB Features:
- 2-way digital monitor speakers ideally suited for computer studios, audio and multimedia workstations
- True bi-amping mode with 4 amplifiers for ultimate sound resolution
- 40 Watt of digital power amplification
- Powerful woofers and high-resolution tweeters provide an ultra-linear frequency response
- USB input to directly connect digital audio sources
- Two stereo analogue inputs featuring TRS and RCA connectors can be used simultaneously or mixed with a digital stereo source