Rode NT2 A condenser microphone

The Rode NT2-A is a professional large capsule (1″) condenser microphone with variable pickup pattern, variable hi-pass filter and a variable pad.

  ... people are viewing this right now
Compare

Original price was: KSh 73,000.00.Current price is: KSh 70,000.00.

Rode NT2-A

The Rode NT2-A is a professional large capsule (1″) condenser microphone with variable pickup pattern, variable hi-pass filter and a variable pad. The Rode NT2-A Large-Capsule Studio Condenser Microphone is a professional, one-inch phantom microphone with variable pick-up patterns, high-pass filter, and pad. 3 – 3-position switches located on the mic body provide selection of figure 8, cardioid, or omni polar pick-up patterns; from a flat response to either 80Hz or 40Hz high-pass filter; and pad adjustments of 0dB, -5dB, or -10dB attenuation.

The heart of the NT2-A is the Australian-designed and manufactured Type HF1 dual-diaphragm capsule. The frequency and transient response of this new transducer has been voiced to complement today’s modern recording techniques and yet still evoke the silky smooth character of the legendary studio microphones of the ’50s and ’60s. Includes a soft pouch and clip. The Rode NT2-A represents an uncommon technical achievement. Many mics today look similar, with 1″ capsules, a mesh head, and a cylindrical body. It is only when you look a little deeper and listen carefully that the major differences become apparent.

The difference is that the costlier Condenser mics are made with the best parts and precision engineered. While these mics are superb, their smaller production volume makes them expensive. They’re hand assembled with parts bought in small quantities Rode has changed the industry by pioneering high quality volume production, investing in more design and tooling using the very finest components and capsules. Rode still offers the NT2-A at a price that would be impossible using older techniques and technologies.

Features:

  • True condenser (externally biased)
  • Large 1″ HF1 capsule with gold-sputtered diaphragm
  • Cardioid, figure-8, and omnidirectional polar patterns
  • Self-noise of only 7 dBA
  • Transformer-less JFET active circuitry
  • Wide dynamic range
  • XLR 3-pin output connector
  • Runs on phantom power
  • Internally shock-mounted capsule
  • Includes SM6 shock-mount, pop filter, and dust cover

NT2-A Microphone shops

The NT2-A is a highly versatile large-diaphragm studio condenser microphone designed to offer pristine audio quality and flexibility in equal measure. Featuring a three-position pad (0dB, -5dB, -10dB), high-pass filter (flat, 40Hz, 80Hz), and polar pattern control (cardioid, omnidirectional, figure-8), it can easily adapt to any recording situation in the studio.

The NT2-A features a dual 1-inch gold-sputtered cardioid condenser capsule with internal shock mounting and offers ultra-low self-noise and a full frequency response, evoking the silky smooth character of the legendary microphones of the ’50s and ’60s.

NT2-A reviews

Key Features

NT2-A Studio Microphone

  • Multi-pattern large-diaphragm studio condenser microphone
  • Three-position pad, high-pass filter and polar pattern controls
  • Ultra-low self-noise and full frequency response
  • Internal capsule shock mounting
  • 10-year warranty

NT2-A Studio Solution Microphone

Specifications

Rode NT2-A condenser Microphone

Acoustic Principle: Pressure Gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 1.00″
Polar Pattern: Cardioid, Figure 8, Omnidirectional
Address Type: Side
Frequency Range: 20Hz – 20kHz
Output Impedance: 200Ω
Maximum SPL: 147dB SPL
Maximum Output Level: 16.0mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity: -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-Weighted): 7dBA
Power Requirements: P24 and P48
Output Connection: XLR

 

Solution condenser Microphone

Rode NT2-A condenser

Brand Rode
Connectivity Technology Wired
Connector Type XLR
Compatible Devices Personal Computer
Color Silver
Included Components pop filer, RØDE SM6 shock mount, dust cover
Polar Pattern Multipattern
Item Weight 860 Grams

NT2-A condenser

Category: 
My Cart
Wishlist
Recently Viewed
Compare Products (0 Products)
Compare Product
Compare Product
Compare Product
Compare Product
Categories