QSC RMX Series QSC 1450 Power Amplifier
QSC RMX Series QSC 1450 Overview
QSC’s RMX Series amplifiers give you clean, dynamic power with the legendary QSC sound quality and reliability that pros depend on. The RMX Series delivers unmatched performance at a breakthrough price.
KSh 75,000.00
QSC RMX Series QSC 1450 Power Amplifier Specifications
Output Wattage, Stereo Mode (EIA: both channels driven):
8 ohms EIA 1 kHz 0.1% THD: 280W
4 ohms EIA 1 kHz 0.1% THD: 450W
2 ohms EIA 1 kHz 1% THD: 700W
Output Wattage, Bridge Mono Mode:
8 ohms EIA 1 kHz 0.1% THD: 900W
4 ohms EIA 1 kHz 1% THD: 1400W
Signal to Noise (20 Hz-20 kHz): 100dB
Distortion (SMPTE-IM): Less than 0.01%
Input Sensitivity @ 8 ohms: 1.12v (+3.4 dBu)
Voltage Gain: 40x (32 dB)
Output Circuitry: AB
Current Consumption (1/8 power pink noise at 4 ohms @ 120VAC, both channels driven; multiply
current by .5 for 230V units.): 7A
Distortion (typical): 20 Hz-20 kHz: 10 dB below rated power: Less than 0.03% THD 4 and 8 ohms
1.0 kHz and below: full rated power: Less than 0.03% THD 4 and 8 ohms
Frequency Response: 20 Hz-20 kHz, 0/-1 dB, -3 dB points: 5 Hz-50 kHz
Damping Factor (1 kHz and below): greater than 300 at 8 ohms
Input Impedance: 10 K ohms unbalanced, 20 K ohms balanced
Input Clipping: 10 Vrms (+22dBu)
Cooling: Continuously variable speed fan, rear-to-front air flow
Connectors (each channel): Input: Active balanced; barrier strip, XLR,and 1/4″ (6.3 mm). TRS tip and XLR pin 2 positive
Output: “Touch-proof” binding posts and Neutrik Speakon
Controls: Front: AC switch, Ch.1 and Ch.2 gain knobs
Rear: 10-position DIP switch
Indicators: PWR-ON: Green LED SIGNAL: Yellow LED (1 per channel) CLIP: Red LED (1 per channel)
Amplifier Protection: Full short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads.
Load Protection: Turn-on/off muting, AC coupling (850, 1450), Triac crowbar (2450, on each channel)
Power Requirements: 100, 120 VAC, 50-60 Hz
Operating Voltage: 110V
Dimensions: rack mounting: 48.3cm (19″); 8.9cm (3.5″) tall (2 rack spaces); 40cm (15.9″) deep (rack mounting to rear support ears)
Net Weight: 18.2 kg (40 lbs.)
QSC RMX Main Feautres
- Power Per Channel @ 8 Ohm: 280W RMS
- Power Per Channel @ 4 Ohm: 450W RMS
- Power Per Channel @ 2 Ohm: 700W RMS
- Signal-to-Noise: -100dB
- Distortion: <0.01%
- Input Sensitivity @ 8 Ohm: 1.15V (+3.4dBu)
- Voltage Gain: 40x (32dB)
- Frequency Response: 20Hz-20kHz
- Damping Factor (1kHz & Below): >300 @ 8 Ohm
- Input Impedance: 10kOhm Unbalanced; 20kOhm Balanced
- Input Stage Clipping: 10V RMS (+22dBu)
- Cooling: Continuously Variable Speed Fan
- Input: Active Balanced 3-Pin Euro-Style Detachable Terminal Block & XLR
- Output: Touch-Proof Binding Posts, Neutrik Speakon
- Controls: AC Switch, Channel Gain Knobs, 10-Position DIP Switch
- Weight: 18.2kg
QSC RMX Series QSC 1450 Power Amplifier
QSC RMX Series QSC 1450 Overview
QSC’s RMX Series amplifiers give you clean, dynamic power with the legendary QSC sound quality and reliability that pros depend on. The RMX Series delivers unmatched performance at a breakthrough price.
QSC RMX Series QSC 1450 Muscular Power Plant
The power supply is the heart of an amplifier, converting raw AC power from the wall to clean DC for the audio circuitry. The RMX uses a powerful high-current toroidal transformer and ample filter capacitance to ensure generous energy reserves.
This makes a critical difference in sound quality, allowing the amp to effortlessly punch out high-level transients, even when driving abusive 2-ohm speaker loads.
QSC RMX Series QSC 1450 Superior Performance
RMX amplifiers deliver true studio-quality sound. A full complementary output circuit using the highest-grade linear output devices delivers ultra-low distortion (<0.05% THD) and ruler-flat frequency response.
SMT (Surface Mount Technology) triples small-signal component density, enabling them to pack up to 2400 watts of power in a chassis with only 2 rack spaces and less than 16″ deep. And unlike other designs, RMX output devices are direct-mounted to the heat sink for optimum thermal coupling and cooling.
The power amp is one of the best amplifiers in Kenya and is worth your money. The power amplifier price in Kenya is affordable yet delivers excellent quality output
Related Products
Peavey CS 2000 Power amplifier
Building on the reputation of the world-famous Peavey CS 800, which conquered the power amp market in the 1970s, the CS Series is the global standard bearer for workhorse reliability.
Over the years, these amps have benefited from some of Peavey’s most popular audio innovations, including our exclusive DDT compression/anti-clipping protection. With its 2RU design and power points up to 4080 watts, this latest evolution of the CS Series is leaner, louder and lighter than ever.
Out of stock
Product Information
- QSC RMX 4050HD amplifier/booter offers you high power in 4 ohms bridged application and 2 ohms stereo applications. You get better reliability and performance with dual mono and high-current power supply of this QSC 2-channel amplifier. This QSC amplifier protects thermal overload on each channel, which in turn protects the speakers. Designed with 16-inch deep chassis, the RMX 4050HD makes for compact-sized equipment. Selectable filters of this QSC 2-channel amplifier increases headroom. Enjoy distortion-free output with independent user-defeatable clip limiters of this QSC amplifier.
QSC RMX Series RMX 3050
QSC RMX Series Features
• User-selectable clipping limiter reduces distortion.
QSC RMX Series RMX 3050 Power Amplifier
• 1/4 “(6.3 mm) TRS balanced socket, XLR plug and bar terminal input.
• Terminals and Neutrik Speakon output terminals
• Front panel with individual gain controls for easy operation
• Signal and clip diode lights monitor the operating status of the amplifier.
• Independent DC power and overheat protection per channel automatically protects the amplifier and speakers.
CA38 Applications
Auditoriums, churches, regional tour sound companies and mobile DJs are all ideal candidates for the CA Series’ combination of value and sonic quality.
The Behringer EP4000 EUROPOWER builds on the incredible legacy of our EP2500, which is one of the best-selling power amps in the industry.
Out of stock
Lab gruppen mx 4400 power amplifier
The Lab Gruppen MX 4400 power amplifier is a professional-grade amplifier known for its high performance and reliability. Here is a description of the Lab Gruppen MX 4400 power amplifier:
Out of stock
Crest Audio CA20 Amplifier
Brand new Crest Audio CA20 Amplifier with genuine 6000watts.
CA series power amplifier/booster covers 2U 3U height. CA series is faster reaction rate, higher damping coefficient, richer functionality, More advanced protection system. CA series has excellent cooling wind path design, compact and solid Mechanical seismic performance, excellent components.
CA series amplifiers can bear 2ohm stereo, 4ohms bridge load, suitable for driving linear array speaker system. It is suitable for large flow performances, the band, DISCO, nightclubs and other occasions.
The Thunder Sound 41200 Power Amplifier is built to deliver exceptional power, clarity, and reliability, making it the perfect choice for large venues, live performances, and professional sound systems.
JBL X8 power amplifier
Out of stock
key Features
- 3RU Design
- Stereo and Bridge Modes
- XLR, 1/4″, and Barrier Strip Inputs
- Speakon and Barrier Strip Outputs
