M-Audio BX5 Carbon Compact studio monitors
M-Audio BX5 specifications
- Type: 2-way near-field studio reference monitors
- LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voicecoil and damped rubber surround. Magnetically shielded
- HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome
- Frequency Response: 56 Hz – 22 kHz
- Crossover Frequency: 2.8 kHz
- LF Amplifier Power: 40 W
- HF Amplifier Power: 30 W
- Signal-to-Noise Ratio: 100 dB typical A-weighted
KSh 25,000.00
M-Audio BX5 Carbon Compact studio monitors
Professional Monitoring for any Studio
The M-Audio BX5 Carbon studio monitor helps you track, monitor, and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 5” woven Kevlar low-frequency driver and 1” natural silk dome tweeter, the BX5 Carbon delivers a flat frequency response, enhanced stereo imaging, and increased clarity for authentic mixing in a space-saving design.
The bi-amplified 80 Watt Class A/B amplification means high power with less noise and ensures that your monitoring setup can handle today’s modern music with ease. With the BX5 Carbon, your music is ready for any listening environment.
Sweeter Sweet Spot
The tweeter’s waveguide of M-Audio BX5 has been enhanced to provide an expansive sweet spot and superior stereo imaging. A wider mix position gives you professional monitoring for any caliber studio.
Pinhole-mounted LED placement cues help locate and light up the sweet spot to ensure a speaker placement that reliably translates stereo information and frequencies. When the LEDs turn bright, you know you’re dead center and ready to start mixing your sessions or laying down tracks with the BX5 Carbon.
Acoustic Control
Mixing doesn’t occur in a vacuum. Your listening environment influences your mixing decisions and, ultimately, the sound of your music. The BX5 Carbon’s Acoustic Space Control, a series of calibration switches, helps provide optimal acoustic conditions for tracking, mixing, and monitoring anywhere.
Adapt the BX5 Carbon to any mixing environment—from bedrooms to basements to professional studios—without compromising frequency detail or stereo image. The result is a flexible monitoring setup for the most demanding mixing environments.
M-Audio BX5 Carbon Compact studio monitors Specifications
M-Audio BX5 specifications
- Type: 2-way near-field studio reference monitors
- LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
- HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome
- Frequency Response: 56 Hz – 22 kHz
- Crossover Frequency: 2.8 kHz
- LF Amplifier Power: 40 W
- HF Amplifier Power: 30 W
- Signal-to-Noise Ratio: 100 dB typical A-weighted
M-Audio BX5 specifications
- Type: 2-way near-field studio reference monitors
- LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
- HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome
- Frequency Response: 56 Hz – 22 kHz
- Crossover Frequency: 2.8 kHz
- LF Amplifier Power: 40 W
- HF Amplifier Power: 30 W
- Signal-to-Noise Ratio: 100 dB typical A-weighted
-
M-Audio BX5 input Connectors:
- 1 x XLR balanced input connector
- 1 x TRS balanced/unbalanced input connector
- Polarity: Positive signal at + input produce outward LF cone displacement
- Input Impedance: 20 KΩ balanced, 10 KΩ unbalanced
- Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
- Protection: RF interference, output current limiting, over temperature, turnon/off transient, subsonic filter, external mains fuse.
- Indicator: Power on/off indicator on rear panel
- Power Requirements: Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or 100 V ~50/60 Hz
- Cabinet: Vinyl-laminated high-acoustic-efficiency MDF
- Dimension (height x width x depth): 9.8″ x 6.9″ x 7.9″, 250 mm x 176 mm x 200 mm
- Weight (without packing): 11 lbs., 5.0 kg*
The studio equiment for music recording usage is one of the best in the markets due to its quality output. The studio equipment for sale in kenya at Audiocom Kenya at very affordable prices
Only logged in customers who have purchased this product may leave a review.
Related Products
Mic Isolation Shield 3 Sided Specifications:
- Dimensions (Fully Extended): 13.8x11x2 inch
- Mic Isolation Shield Weight: 2 lbs
- Sound Absorbing Foam Thickness: 1.57inch
- Material: Foam, Metal
- Color: Black
Mic Isolation Shield 5 Sided
A filter that reduces unwanted noise, ambiance, and sound wave reflection. It also improves the sound quality of recordings by isolating the microphone from the surrounding environment.
Out of stock
Mic Isolation Shield Large Specifications
- Eliminate Interference: Made of absorbing cotton insulation, the inside of this recording studio equipment reduces echo, while the outer layer can filter unwanted noise.
- 【Create A Clean Recording Space】 The 3 panels design features two foldable ventilated metal panels for angle adjustments, giving you optimal pure recording studio.
- Versatility: This sound proof foam panels can be fixed on a desk or tabletop, and also can be mounted to a microphone stand.
- Durability&Convenience: Microphone Shield is constructed out of premium steel with high-quality screws to ensure sturdiness, and long lasting performance.
The Behringer HA8000 V2 – Headphone Amplifier offers the highest sonic quality with virtually all types of headphones even at maximum volume.
PreSonus Eris E8 Active Media Reference Studio Monitors
- Portable and Compact – MIDI Controller
- The most responsive keyboard experience in its category
- 500 of the V-Collection 8 presets / 21 Keyboard Instruments and Synthesizers / fully mapped right out of the box
- The perfect solution to get started with music production
- 16 Assignable Encoders to control your DAW
Pre sonus eris 5 studio monitor
The PreSonus Eris 5 Studio Monitor is a compact and affordable solution for accurate audio monitoring in home studios, multimedia setups, and small professional studios. With its balanced sound reproduction, flexible connectivity options, and compact design, it provides clear and detailed audio playback for critical listening and mixing applications.
28 Channel Snake Cable 40m
| Brand | |
| Connector Type | XLR |
| Cable Type | XLR |
| Compatible Devices | Cellular Phones |
| Unit Count | 1 Count |
Studio Bass Traps Pair
Effective acoustic treatment for low-to-medium frequencies
Carefully selected foam for optimum sound absorption
Corrugated design increases effectiveness
Fire retardant to furniture standards
Microphone Pop Filters Shield Specifications
- 【Two-screen Pop Filters】 The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Efficiently reduce the plosive, wind interference, and saliva spraying during your recording or broadcasting, and get a clear and loud sound.
- 【Adjustable Gooseneck】The pop filter has a flexible 360° gooseneck clip stabilizing arm that can support its own weight and is enough to hold the microphone stand and the inner rubber ring is perfectly matched to your microphone.
- 【MULTI-SCENE APPLICATION】:Studio microphone mic wind screen pop filter mask shield is an essential item for recording, speaking or singing; can be used for singing, voiceover, podcasts, vlogging and anywhere else you need quality sound.
- 【Functions】 Banish the dreaded hissing and lisping sounds that come when pronouncing the letter “S” and block those ugly “plosives” that follow “B” and “P”. Swivel mount for easy installation.
- 【PACKAGE & GUARANTEE】:1 X Pop Filter. If you have any problems after receiving this item, please don’t hesitate to contact us, we will try our best to resolve all issues.
About the item
The Mic Stand is a microphone stand designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.
Reviews
There are no reviews yet.