Table Microphone Stand Best
About the item
The Mic Stand is a microphone stand designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.
Table Microphone Stand
The microphone stand is designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.
Specifications
| Height | 11.22 to 15.75″ / 284.99 to 400.05 mm |
| Base Type | Square |
| Base Dimensions | 7.87 x 7.87″ / 19.99 x 19.99 cm |
| Adjustment Type | Twist Clutch |
Boom
| Length | 12.205″ / 31.00 cm |
| Mounting Thread | 5/8″-27 Male |
| Material | Steel |
| Weight | 1.476 lb / 0.67 kg |
| Package Weight | 4.1 lb |
| Box Dimensions (LxWxH) | 14.25 x 8.85 x 2.1″ |
Related Products
Behringer Truth B2030A Active 2-Way Reference Studio
- Equipped with: 6 3/4” Bass speaker and 3/4” tweeter
- Two built-in power amplifiers (70 W bass, 35 W high range frequency)
- Extremely linear frequency range (50 – 21,000 Hz)
- Separately controlled limiter for bass and treble
- Magnetically shielded
- Servo-balanced inputs on XLR and jack sockets
- Dimensions (W x H x D): 214 x 317 x 211 mm
- Weight approx. 10 kg
- The price is for a pair
Out of stock
PreSonus Eris Studio Monitors Features:
- 4.5-inch, woven-composite, low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 50W (25W/side) Class AB amplification
- Bluetooth 5.0 wireless stereo input
- RCA and ¼-inch balanced TRS rear-panel inputs
- Front-panel 1/8-inch stereo Aux In for use with mobile audio devices
- Integrated headphone amplifier with front-panel stereo 1/8-inch jack
- High- and low-frequency controls let you fine-tune the speaker’s response
- Front-panel Volume control
- Rear-firing, round bass-reflex port
KRK Rokit M6 Studio Monitor
When it comes to professional audio monitoring and sound engineering, having the right tools is crucial. One such tool that has gained significant popularity among audio enthusiasts and professionals is the KRK Rokit M6 Studio Monitor. With its exceptional audio quality, balanced sound, and advanced features, the KRK Rokit M6 offers an unparalleled listening experience. In Kenya, AudioCom is the go-to destination for audio equipment, including the KRK Rokit M6 Studio Monitor. In this article, we will delve into the features, benefits, and overall performance of the KRK Rokit M6 Studio Monitor, while highlighting AudioCom Kenya’s role in making this exceptional speaker system available to consumers.
BEHRINGER MEDIA 40USB Features:
- 2-way digital monitor speakers ideally suited for computer studios, audio and multimedia workstations
- True bi-amping mode with 4 amplifiers for ultimate sound resolution
- 40 Watt of digital power amplification
- Powerful woofers and high-resolution tweeters provide an ultra-linear frequency response
- USB input to directly connect digital audio sources
- Two stereo analogue inputs featuring TRS and RCA connectors can be used simultaneously or mixed with a digital stereo source
Behringer HA 400 Headphone Amplifier allows everyone to listen in, and control the volume of his or her own headphones.
High-performance drivers and mounting system
6.5″ cone woofer, 1″ dome tweeter
Large magnets in an Advanced Magnetic Circuit design
Built-in bi-amplification: 60W LF, 35W HF
Dedicated power amps are perfectly matched to the woofer and tweeter
Enclosure is designed to kill unwanted resonances that can influence sound
Room-control and high-trim response controls give you optimum response in any room
Microphone Pop Filters Shield Specifications
- 【Two-screen Pop Filters】 The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Efficiently reduce the plosive, wind interference, and saliva spraying during your recording or broadcasting, and get a clear and loud sound.
- 【Adjustable Gooseneck】The pop filter has a flexible 360° gooseneck clip stabilizing arm that can support its own weight and is enough to hold the microphone stand and the inner rubber ring is perfectly matched to your microphone.
- 【MULTI-SCENE APPLICATION】:Studio microphone mic wind screen pop filter mask shield is an essential item for recording, speaking or singing; can be used for singing, voiceover, podcasts, vlogging and anywhere else you need quality sound.
- 【Functions】 Banish the dreaded hissing and lisping sounds that come when pronouncing the letter “S” and block those ugly “plosives” that follow “B” and “P”. Swivel mount for easy installation.
- 【PACKAGE & GUARANTEE】:1 X Pop Filter. If you have any problems after receiving this item, please don’t hesitate to contact us, we will try our best to resolve all issues.
The M-Audio® BX studio monitor series is trusted by more musicians and recording professionals than any other. Now, the BX5 D2 monitors extend the bestsellers’ legacy* with an elegant new design inside and out. We leveraged technology from our high-end monitors to extend the frequency response and provide an even more natural listening experience. Custom Class A/B analog amplifiers deliver superior dynamics and tonal accuracy across the frequency spectrum—while the latest-generation woven Kevlar low-frequency drivers and waveguide-loaded silk dome tweeters provide rich, defined sound. With the BX5 D2, you’ll enjoy the utmost accuracy in an engaging listening experience.
The Behringer HA8000 V2 – Headphone Amplifier offers the highest sonic quality with virtually all types of headphones even at maximum volume.
The G4 ROKIT 5″ monitor is built with a scientifically designed speaker enclosure and a front-firing port that offers low-end extension, punch, and flexible room positioning. Other features include Class-D 55W total output power, ISO-foam pads that decouple the speaker from the surface, and a built-in brick wall limiter to protect the system and offer wider dynamics. A power cord is included.
Key Features
- 5″ Woven Kevlar Woofer
- 1″ Silk Dome Tweeter
- Class-AB Amplification
- 40W of LF Power, 30W of HF Power
- Waveguide with LED Placement Cues
- Acoustic Space Control
- 56 Hz to 22 kHz Frequency Response
- XLR and 1/4″ TRS Input Connectors
- Multiple Points of Protection
