Table Microphone Stand Best
About the item
The Mic Stand is a microphone stand designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.
Table Microphone Stand
The microphone stand is designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.
Specifications
| Height | 11.22 to 15.75″ / 284.99 to 400.05 mm |
| Base Type | Square |
| Base Dimensions | 7.87 x 7.87″ / 19.99 x 19.99 cm |
| Adjustment Type | Twist Clutch |
Boom
| Length | 12.205″ / 31.00 cm |
| Mounting Thread | 5/8″-27 Male |
| Material | Steel |
| Weight | 1.476 lb / 0.67 kg |
| Package Weight | 4.1 lb |
| Box Dimensions (LxWxH) | 14.25 x 8.85 x 2.1″ |
Related Products
Behringer HA 400 Headphone Amplifier allows everyone to listen in, and control the volume of his or her own headphones.
Nearfield Studio Monitor Features:
- Versatile nearfield studio monitor that’s great for any style of music
- 8″ Kevlar/aramid composite woofer delivers clear mids and tight bass response
- Soft-dome tweeter with proprietary waveguide provides smooth and lucid highs up to 30kHz
- Active 2-way electronics provide high-headroom/low-noise amplification
- High- and low-frequency controls let you contour your sound to your environment
- Front-slotted bass port and resonant-free cabinet increase sonic clarity
- Radiused edges and contoured front baffle provides clear sound and accurate stereo imaging
- System optimized limiter prevents unexpected peaks from damaging speakers
M-Audio BX8 D2 studio monitor Description
The HS8 Powered Studio Monitor from Yamaha is a bi-amplified monitor that is designed for accurate sound reproduction.
The PreSonus Eris E4.5 BT speakers deliver studio-quality sound with the convenience of Bluetooth® wireless technology.
PreSonus Eris Studio Monitors Features:
- 4.5-inch, woven-composite, low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 50W (25W/side) Class AB amplification
- Bluetooth 5.0 wireless stereo input
- RCA and ¼-inch balanced TRS rear-panel inputs
- Front-panel 1/8-inch stereo Aux In for use with mobile audio devices
- Integrated headphone amplifier with front-panel stereo 1/8-inch jack
- High- and low-frequency controls let you fine-tune the speaker’s response
- Front-panel Volume control
- Rear-firing, round bass-reflex port
Yamaha Hs5 bi-amplified nearfield studio monitor Features
- MP Matched Pair Special Edition – to celebrate 15 years of HS monitors
- Perfectly matched for best sound quality
- Special production process using only selected parts
- Active 2-way bass-reflex near-field monitors
- 5 inch cone woofer and 1 inch dome tweeter
- Bi-Amp (45 watts LF, 25 watts HF)
- Special power amps are perfectly matched to the woofer and tweeter
- ROOM-CONTROL and HIGH-TRIM tone control
- XLR and jack inputs for balanced and unbalanced signals
High-performance drivers and mounting system
6.5″ cone woofer, 1″ dome tweeter
Large magnets in an Advanced Magnetic Circuit design
Built-in bi-amplification: 60W LF, 35W HF
Dedicated power amps are perfectly matched to the woofer and tweeter
Enclosure is designed to kill unwanted resonances that can influence sound
Room-control and high-trim response controls give you optimum response in any room
Behringer Truth B2030A Active 2-Way Reference Studio
- Equipped with: 6 3/4” Bass speaker and 3/4” tweeter
- Two built-in power amplifiers (70 W bass, 35 W high range frequency)
- Extremely linear frequency range (50 – 21,000 Hz)
- Separately controlled limiter for bass and treble
- Magnetically shielded
- Servo-balanced inputs on XLR and jack sockets
- Dimensions (W x H x D): 214 x 317 x 211 mm
- Weight approx. 10 kg
- The price is for a pair
Out of stock
KRK ROKIT 5 G3 features
- 1-inch soft-dome tweeter provides clarity and extended response up to 35kHz
- 5-inch glass-aramid composite woofer delivers clear midrange and tight bass
- Bi-amped, class A/B amplifier offering large headroom and low distortion
- Proprietary waveguide technology optimized for superior imaging
- Low-frequency adjustment tailors the monitors to taste and adjusts for room acoustics
- High-frequency adjustment tailors the system to personal taste
- XLR, 1/4-inch and RCA inputs for universal connectivity in any studio environment
Microphone Pop Filters Shield Specifications
- 【Two-screen Pop Filters】 The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Efficiently reduce the plosive, wind interference, and saliva spraying during your recording or broadcasting, and get a clear and loud sound.
- 【Adjustable Gooseneck】The pop filter has a flexible 360° gooseneck clip stabilizing arm that can support its own weight and is enough to hold the microphone stand and the inner rubber ring is perfectly matched to your microphone.
- 【MULTI-SCENE APPLICATION】:Studio microphone mic wind screen pop filter mask shield is an essential item for recording, speaking or singing; can be used for singing, voiceover, podcasts, vlogging and anywhere else you need quality sound.
- 【Functions】 Banish the dreaded hissing and lisping sounds that come when pronouncing the letter “S” and block those ugly “plosives” that follow “B” and “P”. Swivel mount for easy installation.
- 【PACKAGE & GUARANTEE】:1 X Pop Filter. If you have any problems after receiving this item, please don’t hesitate to contact us, we will try our best to resolve all issues.