M-Audio BX5 Carbon Compact studio monitors
M-Audio BX5 specifications
- Type: 2-way near-field studio reference monitors
- LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voicecoil and damped rubber surround. Magnetically shielded
- HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome
- Frequency Response: 56 Hz – 22 kHz
- Crossover Frequency: 2.8 kHz
- LF Amplifier Power: 40 W
- HF Amplifier Power: 30 W
- Signal-to-Noise Ratio: 100 dB typical A-weighted
KSh 25,000.00
M-Audio BX5 Carbon Compact studio monitors
Professional Monitoring for any Studio
The M-Audio BX5 Carbon studio monitor helps you track, monitor, and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 5” woven Kevlar low-frequency driver and 1” natural silk dome tweeter, the BX5 Carbon delivers a flat frequency response, enhanced stereo imaging, and increased clarity for authentic mixing in a space-saving design.
The bi-amplified 80 Watt Class A/B amplification means high power with less noise and ensures that your monitoring setup can handle today’s modern music with ease. With the BX5 Carbon, your music is ready for any listening environment.
Sweeter Sweet Spot
The tweeter’s waveguide of M-Audio BX5 has been enhanced to provide an expansive sweet spot and superior stereo imaging. A wider mix position gives you professional monitoring for any caliber studio.
Pinhole-mounted LED placement cues help locate and light up the sweet spot to ensure a speaker placement that reliably translates stereo information and frequencies. When the LEDs turn bright, you know you’re dead center and ready to start mixing your sessions or laying down tracks with the BX5 Carbon.
Acoustic Control
Mixing doesn’t occur in a vacuum. Your listening environment influences your mixing decisions and, ultimately, the sound of your music. The BX5 Carbon’s Acoustic Space Control, a series of calibration switches, helps provide optimal acoustic conditions for tracking, mixing, and monitoring anywhere.
Adapt the BX5 Carbon to any mixing environment—from bedrooms to basements to professional studios—without compromising frequency detail or stereo image. The result is a flexible monitoring setup for the most demanding mixing environments.
M-Audio BX5 Carbon Compact studio monitors Specifications
M-Audio BX5 specifications
- Type: 2-way near-field studio reference monitors
- LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
- HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome
- Frequency Response: 56 Hz – 22 kHz
- Crossover Frequency: 2.8 kHz
- LF Amplifier Power: 40 W
- HF Amplifier Power: 30 W
- Signal-to-Noise Ratio: 100 dB typical A-weighted
M-Audio BX5 specifications
- Type: 2-way near-field studio reference monitors
- LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
- HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome
- Frequency Response: 56 Hz – 22 kHz
- Crossover Frequency: 2.8 kHz
- LF Amplifier Power: 40 W
- HF Amplifier Power: 30 W
- Signal-to-Noise Ratio: 100 dB typical A-weighted
-
M-Audio BX5 input Connectors:
- 1 x XLR balanced input connector
- 1 x TRS balanced/unbalanced input connector
- Polarity: Positive signal at + input produce outward LF cone displacement
- Input Impedance: 20 KΩ balanced, 10 KΩ unbalanced
- Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
- Protection: RF interference, output current limiting, over temperature, turnon/off transient, subsonic filter, external mains fuse.
- Indicator: Power on/off indicator on rear panel
- Power Requirements: Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or 100 V ~50/60 Hz
- Cabinet: Vinyl-laminated high-acoustic-efficiency MDF
- Dimension (height x width x depth): 9.8″ x 6.9″ x 7.9″, 250 mm x 176 mm x 200 mm
- Weight (without packing): 11 lbs., 5.0 kg*
The studio equiment for music recording usage is one of the best in the markets due to its quality output. The studio equipment for sale in kenya at Audiocom Kenya at very affordable prices
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Only logged in customers who have purchased this product may leave a review.
Related Products
Yamaha Hs5 bi-amplified nearfield studio monitor Features
- MP Matched Pair Special Edition – to celebrate 15 years of HS monitors
- Perfectly matched for best sound quality
- Special production process using only selected parts
- Active 2-way bass-reflex near-field monitors
- 5 inch cone woofer and 1 inch dome tweeter
- Bi-Amp (45 watts LF, 25 watts HF)
- Special power amps are perfectly matched to the woofer and tweeter
- ROOM-CONTROL and HIGH-TRIM tone control
- XLR and jack inputs for balanced and unbalanced signals
- Portable and Compact – MIDI Controller
- The most responsive keyboard experience in its category
- 500 of the V-Collection 8 presets / 21 Keyboard Instruments and Synthesizers / fully mapped right out of the box
- The perfect solution to get started with music production
- 16 Assignable Encoders to control your DAW
Suitable for both home recording studios and professional mix engineering, the Eris XT studio monitors combine sterling audio quality with the flexible tuning and connectivity you’ve come to expect from PreSonus.
Behringer Studio 50USB Digital Monitor Speakers with USB Input
Product Features
- Ultra-linear 2-way digital monitor speakers ideally suited for computer studios, audio and multimedia workstations
- True bi-amping mode with 4 amplifiers for ultimate high-resolution sound
- 150 Watts of digital power amplification
- Ultra-high resolution 1″ silk dome tweeter for superior audio reproduction
- Long-throw 5″ woofers with deformation-resistant cone for ultimate bass response
- Advanced waveguide technology provides ultimate sound dispersion and an extremely large “sweet spot”
- Adjustable volume control and tweeter sensitivity to adapt to a wide range of acoustic conditions
- USB input for direct connection of digital stereo audio sources
- Two analogue inputs featuring XLR and TRS connectors can be used simultaneously with a digital stereo source
- 3-Year Warranty Program*
- Designed and engineered in Germany
The G4 ROKIT 5″ monitor is built with a scientifically designed speaker enclosure and a front-firing port that offers low-end extension, punch, and flexible room positioning. Other features include Class-D 55W total output power, ISO-foam pads that decouple the speaker from the surface, and a built-in brick wall limiter to protect the system and offer wider dynamics. A power cord is included.
KRK ROKIT 5 G3 features
- 1-inch soft-dome tweeter provides clarity and extended response up to 35kHz
- 5-inch glass-aramid composite woofer delivers clear midrange and tight bass
- Bi-amped, class A/B amplifier offering large headroom and low distortion
- Proprietary waveguide technology optimized for superior imaging
- Low-frequency adjustment tailors the monitors to taste and adjusts for room acoustics
- High-frequency adjustment tailors the system to personal taste
- XLR, 1/4-inch and RCA inputs for universal connectivity in any studio environment
PreSonus Eris E8 XT Studio Monitor
The PreSonus Eris E8 XT Monitor is a powerful and accurate studio monitor designed for professional audio production. With its extended frequency response, robust construction, and flexible connectivity options, it delivers precise and detailed sound reproduction for critical listening and mixing applications.
M-Audio BX8 D2 studio monitor Description
Key Features
- 5″ Woven Kevlar Woofer
- 1″ Silk Dome Tweeter
- Class-AB Amplification
- 40W of LF Power, 30W of HF Power
- Waveguide with LED Placement Cues
- Acoustic Space Control
- 56 Hz to 22 kHz Frequency Response
- XLR and 1/4″ TRS Input Connectors
- Multiple Points of Protection
The PreSonus Eris E3.5 is a pair of 3.5″ 2-way 25W nearfield monitors designed to provide a compact sonic reference system for musicians, producers, and audio engineers in home setups, project studios, and commercial facilities.
High-performance drivers and mounting system
6.5″ cone woofer, 1″ dome tweeter
Large magnets in an Advanced Magnetic Circuit design
Built-in bi-amplification: 60W LF, 35W HF
Dedicated power amps are perfectly matched to the woofer and tweeter
Enclosure is designed to kill unwanted resonances that can influence sound
Room-control and high-trim response controls give you optimum response in any room
- Compact, ultra portable performance keyboard controller with 25 full size, synth action velocity sensitive keys and on board pitch bend and modulation wheels for expressive performances
- 8 velocity sensitive trigger pads for beat production and clip launching, and 8 assignable knobs for manipulating virtual instruments, DAW parameters and plugins on board LCD screen provides instant parameter feedback
- Dedicated octave up and down buttons increase the keyboard to the full melodic range and transport buttons let you control your DAW without reaching for the mouse
- Innovative DirectLink automatically maps controls to popular DAWs including Ableton Live, Pro Tools, Logic, Cubase and more
- Class compliant, plug and play functionality and USB powered specification for simple user friendly setup
- Comprehensive production software package for Mac and PC worth over dollar 100 included; Ableton Live Lite, SONiVOX Twist and AIR Music Tech Xpand
Reviews
There are no reviews yet.