M-Audio BX5 Carbon Compact studio monitors
M-Audio BX5 specifications
- Type: 2-way near-field studio reference monitors
- LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voicecoil and damped rubber surround. Magnetically shielded
- HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome
- Frequency Response: 56 Hz – 22 kHz
- Crossover Frequency: 2.8 kHz
- LF Amplifier Power: 40 W
- HF Amplifier Power: 30 W
- Signal-to-Noise Ratio: 100 dB typical A-weighted
KSh 25,000.00
M-Audio BX5 Carbon Compact studio monitors
Professional Monitoring for any Studio
The M-Audio BX5 Carbon studio monitor helps you track, monitor, and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 5” woven Kevlar low-frequency driver and 1” natural silk dome tweeter, the BX5 Carbon delivers a flat frequency response, enhanced stereo imaging, and increased clarity for authentic mixing in a space-saving design.
The bi-amplified 80 Watt Class A/B amplification means high power with less noise and ensures that your monitoring setup can handle today’s modern music with ease. With the BX5 Carbon, your music is ready for any listening environment.
Sweeter Sweet Spot
The tweeter’s waveguide of M-Audio BX5 has been enhanced to provide an expansive sweet spot and superior stereo imaging. A wider mix position gives you professional monitoring for any caliber studio.
Pinhole-mounted LED placement cues help locate and light up the sweet spot to ensure a speaker placement that reliably translates stereo information and frequencies. When the LEDs turn bright, you know you’re dead center and ready to start mixing your sessions or laying down tracks with the BX5 Carbon.
Acoustic Control
Mixing doesn’t occur in a vacuum. Your listening environment influences your mixing decisions and, ultimately, the sound of your music. The BX5 Carbon’s Acoustic Space Control, a series of calibration switches, helps provide optimal acoustic conditions for tracking, mixing, and monitoring anywhere.
Adapt the BX5 Carbon to any mixing environment—from bedrooms to basements to professional studios—without compromising frequency detail or stereo image. The result is a flexible monitoring setup for the most demanding mixing environments.
M-Audio BX5 Carbon Compact studio monitors Specifications
M-Audio BX5 specifications
- Type: 2-way near-field studio reference monitors
- LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
- HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome
- Frequency Response: 56 Hz – 22 kHz
- Crossover Frequency: 2.8 kHz
- LF Amplifier Power: 40 W
- HF Amplifier Power: 30 W
- Signal-to-Noise Ratio: 100 dB typical A-weighted
M-Audio BX5 specifications
- Type: 2-way near-field studio reference monitors
- LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
- HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome
- Frequency Response: 56 Hz – 22 kHz
- Crossover Frequency: 2.8 kHz
- LF Amplifier Power: 40 W
- HF Amplifier Power: 30 W
- Signal-to-Noise Ratio: 100 dB typical A-weighted
-
M-Audio BX5 input Connectors:
- 1 x XLR balanced input connector
- 1 x TRS balanced/unbalanced input connector
- Polarity: Positive signal at + input produce outward LF cone displacement
- Input Impedance: 20 KΩ balanced, 10 KΩ unbalanced
- Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
- Protection: RF interference, output current limiting, over temperature, turnon/off transient, subsonic filter, external mains fuse.
- Indicator: Power on/off indicator on rear panel
- Power Requirements: Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or 100 V ~50/60 Hz
- Cabinet: Vinyl-laminated high-acoustic-efficiency MDF
- Dimension (height x width x depth): 9.8″ x 6.9″ x 7.9″, 250 mm x 176 mm x 200 mm
- Weight (without packing): 11 lbs., 5.0 kg*
The studio equiment for music recording usage is one of the best in the markets due to its quality output. The studio equipment for sale in kenya at Audiocom Kenya at very affordable prices
Only logged in customers who have purchased this product may leave a review.
Related Products
M-Audio BX6 Carbon Compact studio monitors
The M-Audio BX-6 Carbon is an active studio monitor featuring a 6” woven Kevlar woofer, 1.25” silk-dome tweeter, a bi-amplified 130 watt class A/B design and a unique Acoustic Space Control feature that lets you calibrate the monitor to your mixing environment.
PreSonus Eris E5 BT Active Media Reference Monitors with Bluetooth provide a clear, accurate frequency response and a wide variety of inputs.
High-performance drivers and mounting system
6.5″ cone woofer, 1″ dome tweeter
Large magnets in an Advanced Magnetic Circuit design
Built-in bi-amplification: 60W LF, 35W HF
Dedicated power amps are perfectly matched to the woofer and tweeter
Enclosure is designed to kill unwanted resonances that can influence sound
Room-control and high-trim response controls give you optimum response in any room
Behringer HA 400 Headphone Amplifier allows everyone to listen in, and control the volume of his or her own headphones.
M-Audio BX8 D2 studio monitor Description
Suitable for both home recording studios and professional mix engineering, the Eris XT studio monitors combine sterling audio quality with the flexible tuning and connectivity you’ve come to expect from PreSonus.
The HS8 Powered Studio Monitor from Yamaha is a bi-amplified monitor that is designed for accurate sound reproduction.
Pre sonus eris 4.5 studio monitor
The PreSonus Eris 4.5 Studio Monitor is a compact and affordable solution for accurate audio monitoring in home studios, multimedia setups, and small professional studios. With its compact size, balanced sound reproduction, and convenient features, it provides clear and detailed audio playback for critical listening and mixing applications.
The Behringer HA8000 V2 – Headphone Amplifier offers the highest sonic quality with virtually all types of headphones even at maximum volume.
- Low-frequency: 8″ Aramid Glass Composite woofer
- High-frequency: 1″ soft dome tweeter
- Amplifier: active, class A-B, bi-amplified
- Power output: 100 W
- Input connectors: Balanced XLR, Balanced 1/4″ TRS – 10 kOhm, Unbalanced RCA – 7 kOhm
- LF Level Adjust: -2dB, -1dB, 0, +2dB
- HF Level Adjust: -2dB, -1dB, 0, +2dB
- System volume: -30dB – +6dB
- Frequency response: 35Hz – 35kHz
- Max Peak SPL: 109 dB
- Auto-Standby: 30min
- Magnetic shielding: yes
- Port Configuration: Front firing slot port
- Enclosure construction: MDF
- Dimensions (D x W x H): 12.4″ (315mm) x 10.8″ (275mm) x 15.6″ (396mm)
- Weight: 24.6 Lbs. (11.2 kg)
M-Audio BX8 Carbon Studio Monitors
The BX8 Carbon studio monitors help you track, monitor, and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 8″ woven Kevlar low-frequency driver and 1.25″ natural silk dome tweeter,
Reviews
There are no reviews yet.