Behringer HA8000 V2
The Behringer HA8000 V2 – Headphone Amplifier offers the highest sonic quality with virtually all types of headphones even at maximum volume.
Behringer HA8000 V2
The Behringer HA8000 V2 – Headphone Amplifier is the successor of the HA8000 POWERPLAY PRO-8 Headphones Distribution Amplifier.
The HA8000 V2 offers 8 high-power amplifiers that can drive loads down to 8 Ohms. Each amplifier section features its own 8-digit LED Output Level meter, Main In 1/Main In 2 select switch, a stereo or dual mono select switch, and a ¼” Direct Input for integrating an additional sound source. The front panel gives you one ¼ ” Phones Out jack per channel. The Main Section features a dedicated 5-segment LED Input meter, plus Main In 1 and Main In 2 Level dials.
It features eight totally independent stereo high-power amplifier sections in one rack space, 2 separate main inputs, 2 headphone outputs per channel and even a dedicated direct input for each channel. It offers the highest sonic quality with virtually all types of headphones even at maximum volume.
8-Channel Upgraded Headphone Power Amp and Mix Distro!
Features:
- 8-Channel High-Power Headphones Mixing and Distribution Amplifier
- Professional, multi-purpose headphones amplifier system for stage and studio applications
- Highest sonic quality with virtually all types of headphones even at maximum volume
- 8 totally independent stereo high-power amplifier sections in one rack space
- 2 stereo Main inputs for two independent mixes, accessible from all 8 output channels
- 8 independent Direct inputs provide up to 8 individual stereo mixes
- Output level control and accurate 8-digit LED output meter per channel
- Mono/stereo switch per channel for more flexibility
- 1 front and 1 rear TRS phones connector per channel
- Direct input connector on each channel for easy connection of any sound source
- Parallel Main outputs allow cascading of several headphones amplifiers
- “Planet Earth” switching power supply for maximum flexibility (100
- – 240 V~), noise-free audio, superior transient response plus low power consumption for energy savings
| 5 |
|
0 |
| 4 |
|
0 |
| 3 |
|
0 |
| 2 |
|
0 |
| 1 |
|
0 |
Only logged in customers who have purchased this product may leave a review.
Related Products
High-performance drivers and mounting system
6.5″ cone woofer, 1″ dome tweeter
Large magnets in an Advanced Magnetic Circuit design
Built-in bi-amplification: 60W LF, 35W HF
Dedicated power amps are perfectly matched to the woofer and tweeter
Enclosure is designed to kill unwanted resonances that can influence sound
Room-control and high-trim response controls give you optimum response in any room
The PreSonus Eris E4.5 BT speakers deliver studio-quality sound with the convenience of Bluetooth® wireless technology.
KRK ROKIT 5 G3 features
- 1-inch soft-dome tweeter provides clarity and extended response up to 35kHz
- 5-inch glass-aramid composite woofer delivers clear midrange and tight bass
- Bi-amped, class A/B amplifier offering large headroom and low distortion
- Proprietary waveguide technology optimized for superior imaging
- Low-frequency adjustment tailors the monitors to taste and adjusts for room acoustics
- High-frequency adjustment tailors the system to personal taste
- XLR, 1/4-inch and RCA inputs for universal connectivity in any studio environment
M-Audio BX8 Carbon Studio Monitors
The BX8 Carbon studio monitors help you track, monitor, and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 8″ woven Kevlar low-frequency driver and 1.25″ natural silk dome tweeter,
Pre sonus eris 5 studio monitor
The PreSonus Eris 5 Studio Monitor is a compact and affordable solution for accurate audio monitoring in home studios, multimedia setups, and small professional studios. With its balanced sound reproduction, flexible connectivity options, and compact design, it provides clear and detailed audio playback for critical listening and mixing applications.
PreSonus Eris Studio Monitors Features:
- 4.5-inch, woven-composite, low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 50W (25W/side) Class AB amplification
- Bluetooth 5.0 wireless stereo input
- RCA and ¼-inch balanced TRS rear-panel inputs
- Front-panel 1/8-inch stereo Aux In for use with mobile audio devices
- Integrated headphone amplifier with front-panel stereo 1/8-inch jack
- High- and low-frequency controls let you fine-tune the speaker’s response
- Front-panel Volume control
- Rear-firing, round bass-reflex port
Behringer Studio 50USB Digital Monitor Speakers with USB Input
Product Features
- Ultra-linear 2-way digital monitor speakers ideally suited for computer studios, audio and multimedia workstations
- True bi-amping mode with 4 amplifiers for ultimate high-resolution sound
- 150 Watts of digital power amplification
- Ultra-high resolution 1″ silk dome tweeter for superior audio reproduction
- Long-throw 5″ woofers with deformation-resistant cone for ultimate bass response
- Advanced waveguide technology provides ultimate sound dispersion and an extremely large “sweet spot”
- Adjustable volume control and tweeter sensitivity to adapt to a wide range of acoustic conditions
- USB input for direct connection of digital stereo audio sources
- Two analogue inputs featuring XLR and TRS connectors can be used simultaneously with a digital stereo source
- 3-Year Warranty Program*
- Designed and engineered in Germany
About the item
The Mic Stand is a microphone stand designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.
The M-Audio® BX studio monitor series is trusted by more musicians and recording professionals than any other. Now, the BX5 D2 monitors extend the bestsellers’ legacy* with an elegant new design inside and out. We leveraged technology from our high-end monitors to extend the frequency response and provide an even more natural listening experience. Custom Class A/B analog amplifiers deliver superior dynamics and tonal accuracy across the frequency spectrum—while the latest-generation woven Kevlar low-frequency drivers and waveguide-loaded silk dome tweeters provide rich, defined sound. With the BX5 D2, you’ll enjoy the utmost accuracy in an engaging listening experience.
The HS8 Powered Studio Monitor from Yamaha is a bi-amplified monitor that is designed for accurate sound reproduction.
PreSonus Eris Studio Monitors
- 3.5″ woven composite woofers deliver solid low-end sound with minimal bass distortion
- 50-watt Class AB amplification (25 Watts per speaker) provides plenty of volume and headroom for nearfield monitoring
- RCA and balanced 1/4″ inputs provide all the connections you may need
- Aux input for connecting your smartphone or media player
- Acoustic tuning controls let you contour your sound to best meet your mixing environment
PreSonus Eris E8 XT Studio Monitor
The PreSonus Eris E8 XT Monitor is a powerful and accurate studio monitor designed for professional audio production. With its extended frequency response, robust construction, and flexible connectivity options, it delivers precise and detailed sound reproduction for critical listening and mixing applications.




















Reviews
There are no reviews yet.