Behringer FBQ 1000 2-Channel Feed-Back Destroyer
Behringer FBQ 1000 2-Channel Feed-Back Destroyer Specifications
High-Performance 2-Channel Feedback Destroyer and Parametric
EQ Automatically and “intelligently” locates and destroys up to 24 frequencies
Ultra-narrow FBQ filters for extremely effective feedback suppression while maintaining the highest sound quality.
Default “Set-and-forget” settings allow for immediate and super-easy performance of Feedback Destroyer
Auto mode continuously monitors the mix and automatically sets the filters.
Behringer FBQ 1000 2-Channel Feed-Back Destroyer
The FBQ1000 Feedback Destroyer is the fastest feedback suppressor on the market, with a response time of less than 0.2 seconds.
Whether you use it to kill feedback dead in its tracks for your mains and/or monitors, or as a sophisticated parametric equalizer to fine-tune the acoustics of your next gig, the FBQ1000 will bring a new level of finesse to your sound. And if you use in-ear-monitors, the FBQ1000 is a must-have to protect your most valuable assets – your ears!
Behringer FBQ 1000 2-Channel Feed-Back Destroyer Specifications
High-Performance 2-Channel Feedback Destroyer and Parametric
EQ Automatically and “intelligently” locates and destroys up to 24 frequencies
Ultra-narrow FBQ filters for extremely effective feedback suppression while maintaining the highest sound quality.
Default “Set-and-forget” settings allow for immediate and super-easy performance of Feedback Destroyer
Auto mode continuously monitors the mix and automatically sets the filters.
The studio equipment for music recording usage is one of the best in the market due to its quality output. The studio equipment for sale in Kenya at Audiocom Kenya is at a very affordable price.
Only logged in customers who have purchased this product may leave a review.
Related Products
The M-Audio® BX studio monitor series is trusted by more musicians and recording professionals than any other. Now, the BX5 D2 monitors extend the bestsellers’ legacy* with an elegant new design inside and out. We leveraged technology from our high-end monitors to extend the frequency response and provide an even more natural listening experience. Custom Class A/B analog amplifiers deliver superior dynamics and tonal accuracy across the frequency spectrum—while the latest-generation woven Kevlar low-frequency drivers and waveguide-loaded silk dome tweeters provide rich, defined sound. With the BX5 D2, you’ll enjoy the utmost accuracy in an engaging listening experience.
About the item
The Mic Stand is a microphone stand designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.
Key Features
- 5″ Woven Kevlar Woofer
- 1″ Silk Dome Tweeter
- Class-AB Amplification
- 40W of LF Power, 30W of HF Power
- Waveguide with LED Placement Cues
- Acoustic Space Control
- 56 Hz to 22 kHz Frequency Response
- XLR and 1/4″ TRS Input Connectors
- Multiple Points of Protection
High-performance drivers and mounting system
6.5″ cone woofer, 1″ dome tweeter
Large magnets in an Advanced Magnetic Circuit design
Built-in bi-amplification: 60W LF, 35W HF
Dedicated power amps are perfectly matched to the woofer and tweeter
Enclosure is designed to kill unwanted resonances that can influence sound
Room-control and high-trim response controls give you optimum response in any room
- Portable and Compact – MIDI Controller
- The most responsive keyboard experience in its category
- 500 of the V-Collection 8 presets / 21 Keyboard Instruments and Synthesizers / fully mapped right out of the box
- The perfect solution to get started with music production
- 16 Assignable Encoders to control your DAW
PreSonus Eris Studio Monitors Features:
- 4.5-inch, woven-composite, low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 50W (25W/side) Class AB amplification
- Bluetooth 5.0 wireless stereo input
- RCA and ¼-inch balanced TRS rear-panel inputs
- Front-panel 1/8-inch stereo Aux In for use with mobile audio devices
- Integrated headphone amplifier with front-panel stereo 1/8-inch jack
- High- and low-frequency controls let you fine-tune the speaker’s response
- Front-panel Volume control
- Rear-firing, round bass-reflex port
PreSonus Eris E8 XT Studio Monitor
The PreSonus Eris E8 XT Monitor is a powerful and accurate studio monitor designed for professional audio production. With its extended frequency response, robust construction, and flexible connectivity options, it delivers precise and detailed sound reproduction for critical listening and mixing applications.
Pre sonus eris 4.5 studio monitor
The PreSonus Eris 4.5 Studio Monitor is a compact and affordable solution for accurate audio monitoring in home studios, multimedia setups, and small professional studios. With its compact size, balanced sound reproduction, and convenient features, it provides clear and detailed audio playback for critical listening and mixing applications.
Pre sonus eris 5 studio monitor
The PreSonus Eris 5 Studio Monitor is a compact and affordable solution for accurate audio monitoring in home studios, multimedia setups, and small professional studios. With its balanced sound reproduction, flexible connectivity options, and compact design, it provides clear and detailed audio playback for critical listening and mixing applications.
Behringer Truth B2030A Active 2-Way Reference Studio
- Equipped with: 6 3/4” Bass speaker and 3/4” tweeter
- Two built-in power amplifiers (70 W bass, 35 W high range frequency)
- Extremely linear frequency range (50 – 21,000 Hz)
- Separately controlled limiter for bass and treble
- Magnetically shielded
- Servo-balanced inputs on XLR and jack sockets
- Dimensions (W x H x D): 214 x 317 x 211 mm
- Weight approx. 10 kg
- The price is for a pair
Out of stock
Reviews
There are no reviews yet.