Behringer Eurolive B208D 200W 8 inch Powered Speaker
Thanks to Behringer’s revolutionary Class-D amplifier technology and internal switch-mode power supplies, EUROLIVE D Series loudspeakers provide a much better power-to-weight ratio than competing active speakers.
Put simply, you get all the power without the back-breaking weight. And the sound quality of these lightweight loudspeakers exceeds that of the extremely popular EUROLIVE B212A and B215A systems — plus they’ve included two 200-Watt models, the B210D (10″) and B208D (8″) for less demanding applications.
KSh 35,000.00
Brand | Behringer |
Model Name | B208D |
Speaker Type | Outdoor |
Special Feature | Protection |
Subwoofer Diameter | 8 Inches |
About this item
- Integrated Pole Mount (each)
- Built-in HF LF Protection
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Integrated sound processor for ultimate system control and speaker protection
Thanks to Behringer’s revolutionary Class-D amplifier technology and internal switch-mode power supplies, EUROLIVE D Series loudspeakers provide a much better power-to-weight ratio than competing active speakers.
Put simply, you get all the power without the back-breaking weight. And the sound quality of these lightweight loudspeakers exceeds that of the extremely popular EUROLIVE B212A and B215A systems — plus they’ve included two 200-Watt models, the B210D (10″) and B208D (8″) for less demanding applications.
Due to their high-efficiency design, they crank out 550/200 of the cleanest, punchiest audio Watts you’ve ever heard from a compact loudspeaker system. The integrated sound processor provides total system control, along with dependable protection of the LF and HF transducers, thanks to the built-in active high-pass filter, which virtually eliminate distortion — even at extreme operating levels. In addition, all four models feature an Ultra-Low Noise (ULN) Mic/Line input with LEVEL control and a dedicated 2-band EQ (bass/treble) for easy control.
One of the coolest things about active loudspeakers is the lack of back-breaking racks of amps, crossovers and EQs that are often required to make passive speaker systems sound almost as good. But that comes with a trade-off — that extra weight is transferred to the loudspeaker, making it difficult for a single user to heave all that mass onto the top of a speaker stand.
BEHRINGER’s D Series’ “Intelligent-Design” merges the best features of active loudspeakers with significantly lower weight by using switch-mode power supplies and Class-D amplifier topology.
Hidden deep inside each enclosure is the equivalent of an active 2-way electronic crossover, graphic EQ, parametric EQ, mic preamp, limiter and two Class-D power amplifiers, yet overall weight is less than comparable loudspeaker systems! These components work together seamlessly to provide optimum sound quality — and it all takes place automatically, without you having to touch a single knob.
When combined with switching-mode power supplies that replace heavy toroid transformers, our new designs provide more dynamic punch since the higher switching frequency reloads the supply’s capacitors much faster. And, because they are so much more efficient, the D Series runs cooler and doesn’t require huge, heavy heat sinks. The resulting speakers systems are much lighter, making them easy to transport and set up. Our no-compromise design means your D Series active loudspeakers will deliver full power and incredible fidelity all night long, with no need for rest cycles.
Thanks to their trapezoidal design, these cabinets can be laid on their side providing the ideal angle for onstage monitor wedge applications. Hookup is simple, requiring only a single XLR or 1/4″ cable from the monitor send on your mixing console and, of course, power. Additional monitors can be chained together via the XLR LINK OUTPUT jack on the rear panel.
Features
- High-power 220-Watt 2-way PA sound reinforcement speaker system for live and playback applications
- Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
- Integrated sound processor for ultimate system control and speaker protection
- Extremely powerful 8” long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1.35” aluminum-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential/conical horn
- Ultra-low noise Mic/Line input with Volume control and Clip LED
- Additional Line output allows linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
- High-quality components and exceptionally rugged construction ensure long life
- 3 Year Warranty
Find this product and many more from Audiocom Kenya.
Related Products
- High power, two-way bass reflex full range system
- 2 x 15″ high power, 4″ voice coil hypervented woofers
- 1 x 4″ high power titanium neo compression driver
- 137dB max SPL
- 1800 Watt AES
- Very high output, response down to 40Hz
- Birch plywood cabinet
- Weather resistant, textured, polyurea finish
- Epoxy powder coated front grille
The JBL JRX118S is a non-powered subwoofer rated at 350 watts of continuous power handling at 4 ohms (1400 watts peak). This thumpin’ sub is designed with a JBL 18″ woofer with a cast frame and 3″ voice-coil. It incorporates a sophisticated, advanced network topology design to ensure quality performance.
The JRX118S is driven by a massive JBL 18″ woofer with a cast frame and 3″ voice-coil.
Out of stock
Nearfield Studio Monitor Features:
- Versatile nearfield studio monitor that’s great for any style of music
- 8″ Kevlar/aramid composite woofer delivers clear mids and tight bass response
- Soft-dome tweeter with proprietary waveguide provides smooth and lucid highs up to 30kHz
- Active 2-way electronics provide high-headroom/low-noise amplification
- High- and low-frequency controls let you contour your sound to your environment
- Front-slotted bass port and resonant-free cabinet increase sonic clarity
- Radiused edges and contoured front baffle provides clear sound and accurate stereo imaging
- System optimized limiter prevents unexpected peaks from damaging speakers
PreSonus Eris Studio Monitors Features:
- 4.5-inch, woven-composite, low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 50W (25W/side) Class AB amplification
- Bluetooth 5.0 wireless stereo input
- RCA and ¼-inch balanced TRS rear-panel inputs
- Front-panel 1/8-inch stereo Aux In for use with mobile audio devices
- Integrated headphone amplifier with front-panel stereo 1/8-inch jack
- High- and low-frequency controls let you fine-tune the speaker’s response
- Front-panel Volume control
- Rear-firing, round bass-reflex port
12” Two-Way Full-Range Main System
The JBL PRX812 is a full-range speaker designed for main system and floor monitor applications. Featuring a 12”, two-way, bass-reflex design powered by a 1500-watt class-D amplifier, PRX812 delivers incredible volume in a lightweight and compact form factor.
Out of stock
PreSonus Eris Studio Monitors
- 3.5″ woven composite woofers deliver solid low-end sound with minimal bass distortion
- 50-watt Class AB amplification (25 Watts per speaker) provides plenty of volume and headroom for nearfield monitoring
- RCA and balanced 1/4″ inputs provide all the connections you may need
- Aux input for connecting your smartphone or media player
- Acoustic tuning controls let you contour your sound to best meet your mixing environment
12″ High-Power Two-Way Stage Monitor
The SRX712M was designed with one goal – build the lightest, smallest, loudest, clearest stage monitor possible while delivering strikingly professional appearance.
Out of stock
RCF M15 Monitor Speaker
It is a high-performance audio device designed for professional stage monitoring applications. With its powerful sound reproduction, durable construction, and advanced features, this monitor speaker provides clear and accurate monitoring for musicians and performers on stage. The Speaker offers exceptional sound quality, reliable performance, and ease of use, making it an excellent choice for live performances, concerts, and events.
EKX 215 Full Range Loudspeaker
The EKX 215 Speaker is a powerful and versatile audio device designed to deliver exceptional sound performance for live sound reinforcement and installation applications. With its robust construction, advanced features, and impressive power handling capabilities, this speaker provides clear and impactful audio reproduction. Whether you’re a musician, DJ, or audio professional, the Fullrange speakers Speaker offers a reliable and professional-grade solution for venues, concerts, events, and more.
Yamaha NS AW350W 2 Way Speakers
The Yamaha NS AW350W 2 Way Speakers are durable and weather-resistant speakers that provide exceptional sound performance. With a 6.5-inch woofer and a 1-inch tweeter, these speakers deliver detailed and immersive audio both indoors and outdoors. They feature a 2-way acoustic suspension design for accurate sound reproduction and come with versatile mounting options.
The Yamaha NS AW350W speakers are easy to install and connect to your audio system, making them a convenient and reliable choice for enhancing your audio experience.
EKX 112 EV Speaker
The EKX 112 EV Speaker is a high-quality and versatile audio device that delivers exceptional sound performance and durability. Designed for both live sound reinforcement and installation applications, this speaker offers powerful and clear audio reproduction. With its rugged construction, advanced features, and portable design, the EKX-112 EV Speaker is an excellent choice for musicians, DJs, and audio professionals seeking reliable and professional-grade sound reinforcement.
The EKX series is the newest member of the Electro-Voice portable loudspeaker family, and combines legendary EV sound quality and reliability with the latest technology – all in a compact package suitable for a wide range of sound reinforcement scenarios, including musicians/DJs and live/club/installed sound applications.
Ideal for portable and installed applications
Lightweight, compact 15-mm wood enclosures with internal bracing, durable EVCoat finish, eight M10 threaded mounting points (full-range models), aluminum pole-mounts, and all-metal handles.
Subs feature large slot ports for low distortion and excellent bass extension, and are equipped with a metal grille reinforcement bar.